Horus (Wedges)

aka: Acoustic Panel Studio Foam 50cmx50cmx5cm

Neoflux Horus wedge design has sound absorption capabilities making it suitable for home & professional recording studios, vocal booths and libraries. Our Horus foam neutralizes your room for a cleaner recording resulting a fuller and less flat sound.

• Each Neoflux acoustic foam panel is delivered uncompressed and in prime condition.
• Professional grade foam made of lightweight polyurethane
• Crafted with flame resistent material preventing acoustic foam from catching fire
• Reduces fluttering echoes, reverb, sound waves  and any residual sounds.
• Improves room acoustics for better sound quality and vocal clarity
• Most effective on more low end sound usually associated with loud percussion instruments.
• Also great at controlling mid-to-high frequency ranges and excels in dispersion.

Specs:

Foam Aesthetics: Wedge

Dimensions: 50cm x 50cm x 5cm thickness
Density (Core): 30kg/m3
Colour: Charcoal Grey

Installation methods:
Neoflux acoustic foams can be mounted on walls and ceilings with:
- Spray adhesive
- Double-sided adhesive tape

*For best results, apply a thin layer of all-purpose/white glue on the back. Wait for it to dry before adding a new layer of Spray adhesive or double sided adhesive tape

How many panels should I buy:
It really depends on the size of your room. To save you the technical jargon, for starters you can refer to the Acoustic Treatment guide excerpt below:


Whenever two opposing walls are parallel to each other, sound waves have a tendency to reflect back and forth in the same spot.

This causes some frequencies to be amplified, and others to be cancelled-out.

To avoid this problem, mount your acoustic panels flat on the walls, and be sure to spread them evenly throughout the entire room.

To get maximum effectiveness from a limited number of panels, avoid placing panels on BOTH points of opposing walls and instead, stagger their positions as shown in the above picture.