Golden Fuji High Pressure Gas Regulator

• Build in Stainless Steel Filter
• Reduce Blockage
• Cleaner Combustion

Buatan Malaysia With SIRIM n EN ISO 9001

Important

Please read the instructions carefully before connecting the regulator.

Customer Information

Only fit a new approved hose and secure the hose tightly with hose clips at both regulator and appliance.

If the regulator is used outdoors, it must be protected from exposure to water,

i.e: Rain, snow , etc..

If u have any doubtsor difficulties, please contact your local gas dealler.

Warning!!!

Never disconnect the gas regulator from the cylinder valve if a burner remain alight.

Never use a match or naked flame to search for leaks. Use soapy water or liquid detergent instead.

Do not use it on a LOW PRESSURE appliances. 

connecting the regulator

1. Ensure that the switch is pointing down wards. Place the regulator on the cylinder valve.
2. Turn the switch clockwise so that it points to the left (the "OFF" position).

Turning the gas "ON"  and "OFF"

1. Operates the switch clockwise so that it points upwards. The cylinder valve is now open and gan is "ON".
2. To turn the gas "OFF" , turn the switch anti clockwise until it points to the left.

Disconnecting the regulator.

1. From the gas "OFF" position, operate the switch anti clockwise until it points downwards.
2. The regulator can now be remove from the valve.
3. Affix the plastic cap to the cylinder valve.

Please PM us for any inquiry or quotation of any quantity, we are happy to assists......thanks