Item Descriptions:

If you install the tablet bar mount holder, you can enjoy the tablet function comfortably.

Bar mount tablet holder

【Spec. (Specification)】

Approximately 7 inches to 10 inches tablet terminal (9.7 inches also) Nexus 10 ipad air etc compatible.

Equipment loading size: Height (It corresponds to the mounting part length of about 11 cm, the longest about 20 cm in a narrow state) Thickness (up to about 17 mm)

Mounting mountable diameter about 20 to 33 mm Installation is open end (spanner) 10 mm tool is required, but it is easy to tighten the screws.

With band rubber 1 (Please devise to use for fall prevention etc.)

Simple instruction manual is attached.

You can fix tablet terminals etc to fitness bike · exercise bike etc.

In case

As the measures to prevent the mount and the tablet holder from falling off due to vibration or the like are becoming hard to fit, it is possible to fix it after inserting the mount and the tablet holder and further pushing it in until it pushes it all the way in.

In case

The anti-slip design and the part in contact with the tablet are made of high quality rubber material, it is hard to scratch the smartphone, it is gentle, yet it can be fixed firmly.

Since there is rubber cushion on the nail part that holds the device etc, protect the tablet etc from scratches.

Motorcycles, bicycles, etc. can also be installed, but there is a risk of falling off the mounted items during use.

In case

If you are using motorcycles, bicycles, etc. please install it in a location with low wind pressure.

In case

It is a plastic product so it will be damaged by excessive wind pressure.

In case

In regards to handling with motorcycles etc, please be careful enough at purchaser's own responsibility.

In case

【please note】

This product is not a product that guarantees sufficient fixation.

In case

Depending on the usage situation, the mounted items drop off.

In case

We recommend that you take measures to prevent falling of mounted equipment separately.

In case

Those who wish to secure strong fixation, please prepare screws, bonds, rubber etc. on the customer side and fix it.

In case

Depending on the handle diameter there are things that can not be installed.

In case

Please be sure to purchase from confirming the size of your hand navigation and tablet etc.

In case

Image tablets etc are not included.

In case

Because it is not heat resistant specification, there is a possibility of dropout of the mounted item depending on the usage situation.

Avoid using it in a place exposed to direct sunlight.

It may cause cracks, warping, etc.

Please understand that there may be some design change, standard change without notice, please note on your purchase.

Features:

• In-car holder for tablet bar mount mounting type It can rotate 360 ​​degrees.
• You can fix tablets etc to fitness bike · exercise bike etc.
• Motorcycle Bike Although it is possible to mount also on bicycles and the like, there is a risk of falling off loaded items during use.
• ※ Applicable models: iPad, iPad Air, iPad Pro, ipad mini, Nexus 10, Nexus 7 can be installed, of course, but it can support various sizes such as device terminals similar to ipad, Nexus 10 shape.
• The main body can rotate 360 ​​degrees.
• A metal ball joint is mounted on the mount.
• You can adjust the angle freely, vertically, horizontally, diagonally.
• It can also be easily installed in an easy-to-view orientation that allows for angle adjustments in the up, down, left and right direction.
• The anti-slip design and the part in contact with the tablet are made of high quality rubber material, it is hard to scratch the smartphone, it is gentle, yet it can be fixed firmly.
• Since there is rubber cushion on the nail part that holds the device etc, protect the tablet etc from scratches.
• Applicable size: Width about 11 cm to 20 cm Corresponding thickness up to about 17 mm Corresponding body weight: about 270 g mount mountable diameter about 20 - 33 mm installation open end (spanner) 10 mm tool required but easy to tighten screws
• It is installation.
• Please prepare the tool by customer.
• With a falling-off band rubber 1 piece (Please devise to use for fall prevention etc.) Instruction manual will be attached.

Product information:

Shipping Weight: 340 g

Package Dimensions: 7.19 x 15.39 x 21.79 cm