Item Descriptions:

【Multi-machine support】

Mobile with ios system and andriod system, iPhone 7 / 7Plus / SE / 6s / 6sPlus / 5s / 4s Samsung Galaxy S8 / S7 / S6 etc. It can correspond to 3 ~ 6.5 inch models.

Please note: Before purchasing carefully check if the dashboard panel is applicable.

【Easy to remove】

Since it is a clip type, just attach the main unit base to the dashboard and secure it securely.

It is very easy to remove.

【Easy to install】

1. The base of this product is clipped to the end of the dashboard.

The opening can not exceed 40 mm.

2. Lift the clip on the top of this product and install the phone.

The width opens up to about 12 cm.

3 Easily adjust the angle as you like.

While driving, the driver can easily operate by touching the mobile screen with one hand.

[With anti-slip mat]

Non-slip silicone is attached to the main body base and the opening, you can firmly pinch the dashboard and the mobile, it can provide higher stability.

You can also prevent mobile phone and dashboard from getting scratched.

【With cable drop】

Cable drop is designed to not interfere with operation of this smartphone in-vehicle holder because it can fix and store wire cable such as charging cable and earphone etc. that is frustrating in the car, so even when using the device, charging

can.

[Creative HUD simulation design]

The smartphone in-vehicle holder is clamped at the edge of the dashboard of the car, the driver can see the smart screen gaze during driving, can match with the road and mobile, and for safety purposes like HUD, unnecessary

You can avoid accidents.

【Multifunction Stand】

This product is not a special car stand for high-grade smartphones, it's a special double-bent base design, so you can put it directly on any level surface and it is used as a convenient smartphone stand.

【Precautions for use】

1, When installing the holder, the opening should not exceed 40 mm.

2, Please adjust the height of the seat to match your line of sight with the mobile screen.

3, Please adjust the angle of the seat to make it easy to see the mobile screen.

4, Please confirm that the distance from the tip of the dashboard to the depth is over 25 mm.

Otherwise, the mobile holder becomes slippery.

5, Please do not use for a long solar radiation day long.

6, Please check whether the mobile is securely attached before running.

Features:

• 【HUD simulation design】 The driver's hands can be seen by the driver on the smart screen gaze while driving while holding the smartphone in-vehicle holder at the edge of the dashboard of the car, it can be matched with the road and cell phone, driving for safety such as HUD
• You can avoid unnecessary accidents inside.
• [With anti-slip mat] With non-slip silicone in the base base and opening, you can firmly pinch the dashboard and mobile, can provide higher stability.
• You can also prevent mobile phone and dashboard from getting scratched.
• 【With Cable Drop】 Cable Drop is designed to not interfere with operation of this smartphone in-vehicle holder, as wire cable such as earphone etc. can be fixed and stored neatly by charging cable which is scratched in car.
• Even though it can be charged.
• [Easy to attach and detach] Since it is a clip type, just attach the main unit base to the dashboard and secure it securely.
• It is very easy to remove.
• While driving, the driver can easily operate by touching the mobile screen with one hand, driving safety increases.
• Also, because it is a special double bent base design, you can put it directly on any horizontal plane and it is used as a convenient smartphone stand.
• 【Multi-machine support】 Mobile phone that uses ios system and andriod system, iPhone 7 / 7Plus / SE / 6s / 6sPlus / 5s / 4s Samsung Galaxy S8 / S7 / S6 etc. It can correspond to 3 ~ 6.5 inch models.
• Please note: Before purchasing carefully check if the dashboard panel is applicable.

Product information:

Shipping Weight: 181 g

Package Dimensions: 5.59 x 10.21 x 14.40 cm