Description:<br />Detecting a non-contact position， and when there is an obstacle blocking the probe， the output control level.<br /><br />Main Features: <br />● Input supply voltage: DC 7-35V<br />● Power consumption: Look to take control of the output load may be， if it is a 5V relay， if the maximum current consumption is about 60mA 5V output to bring the buzzer， the maximum current consumption of about 40mA. If the output is only controlled high and low， then the maximum current consumption of less than 15mA. Static power consumption is about 7mA<br />● Input and output signal voltages: OUT-end: OC output， NPN transistor open collector output<br /><br />    Specifications<br />General<br />  Material: Glass fiber + plastic + iron                                                 <br />Weight and Size<br />  Product Weight: 5 g                                                  <br />                        Package Weight: 0.045 kg                                                  <br />                        Product Size(L x W x H): 5 x 1.5 x 1.9 cm / 1.97 x 0.59 x 0.75 inches                                                  <br />                        Package Size(L x W x H): 10 x 7 x 2.5 cm / 3.93 x 2.75 x 0.98 inches                                                 <br />Package Contents<br />  Package Contents: 1 x Maitech DIY Diffuse Photoelectric Switch Module                                                 <br /><br /><br /><br />                                                <br />