Item Descriptions:

Product introduction

___ ___ ___ ___ ___ 0 ___ ___ ___ ___ ___ 0

(Note 3) The resin adopts the UO-standard VO grade which is a strict US safety standard.

We have enhanced safety at emergency heater emergency fire.

(Note 3) (Note 1) * There are some auto heaters other than Kotobuki craftworks, heat fuses, and heaters with air firing prevention function can not be used.

(Note 2) Although the use of heater cover is indicated in the auto heater package and instruction manual made by Kotobuki craft, this product can be used.

(Note 3) * In case of empty firing, the resin burns and it will not ignite, but it may deform, melt, or smoke by heat.

There is a danger of catching fire if there are nearby burnable objects (paper, cloth etc.), please be careful enough.

(The heater pipe at empty boiling is extremely dangerous at a high temperature of about 500 degrees Celsius or more) Flame retardant resin V - O grade is adopted.

made in Japan.

Available heater size: Heater pipe length 308 mm or less, Heater pipe thickness (diameter) 24 mm or less.

* It can not be used when the length of the heater pipe is 165 mm or less.

Usage notes

Be sure to read the instruction manual carefully before using this product.

This product is ornamental fish supplies.

Please do not use for other uses.

Be sure to use this product underwater.

Please do not fill this product in gravel or cover decoration such as stone.

Also, be sure to circulate the water in the aquarium using an air pump or a filter, and be sure to place it in a place with the flow of water.

If you wish to put this product out of the water or set it, please unplug the power plug of the electric product used in the aquarium.

Also, when removing this product from underwater, please turn off the heater used, remove it after the heater has cooled sufficiently.

If breeding of small fish with habit of entering into the gap of this product, or keeping frying fish etc. isolate it with isolation case etc. Please use.

Please read the owner's manual of the heater main unit to be used carefully.

Be sure to set this product (heater) horizontally.

Please make sure that the temperature is properly set by the water temperature gauge on a regular basis.

If garbage, dirt moss etc. adhere to the gap between this product and the heater, there is a possibility of malfunction.

Please clean regularly.

Do not use metal heaters such as titanium.

If you are using a heater other than Kotobuki craftwork, please check with our dealer or our company just in case.

In that case, please also carefully read the instruction manual of the heater main unit to be used.

Show all product descriptions

Features:

• Body size (width X depth X height): 3.9 × 3.9 × 23.4 cm
• Body weight: 55 g
• Country of Origin: Japan

Product information:

Shipping Weight: 86 g

Package Dimensions: 4.09 x 4.09 x 23.60 cm