Machine line one KVM 2 mainframe computer sharing a mouse and keyboardto switch a display with a desktop controller， switching easily

Hardware installation:

1， the KVM special line is connected to the host computer's corresponding port

2， a set of USB keyboard， mouse， control port a display connected to the KVMswitch

3， after all the host fully activated， you can use the KVM switch

Method of use:

1， boot mode: when you take all the PC， you can also open to the operation of the PC， until after all the PC. (Note: no start up process in PC， see don't switchPC port)

2， switching mode: press after step 1， you can through the KVM button on the panel switch.

3， the keyboard hotkey commands: only need 2 seconds press the SCROLLLOCK key connection continued two times can send commands to the KVM switch，

Without software control， through the button or hotkey (press the ScrollLOCK key + number keys two to 1 or 2) computer host switch to the operation of.