AOK BC168 1-6S 8A Balance Charger with Parallel Charging BoardDescription:Name: AOK BC168 1-6S 8A Balance ChargerBrand: AOKModel: BC168Weight: 1030gItem size: 165X123X52mmPackage size: 230*150*80mm  Input Voltage Range: 11~15V DCInput Power Range: 300WCharge Power:  201.6 W (33.6W x 6Cells@Cells=4.2V)Discharge Power:  75.6 W (12.6 W x 6Cells@Cells=4.2V)Balance Power:  201.6 W (33.6W x 6Cells@Cells=4.2V)Charge Voltage Adjustable range:  1.50V~4.20V (default value 4.2V)Charge Current Adjustable range:  0.1A~8.0A (default value 3.0A)Discharge Voltage Adjustable range:  2.00V~4.20V (default value 3.80V)Discharge Current Adjustable range:  0.1A~3.0A (default value 3.0 A)Balance Voltage Adjustable range:  2.00V~4.20V (default value 3.80V)Balance Current Adjustable range:  0.1A~8.0A (default value 3.0 A)Charge temperature alarm adjustable range: 20\u2103~80\u2103 (default value 80\u2103)Display backlight brightness adjustable range: 0~5 (default value 5)Display backlight off time adjustable range: - : -- ~ 0:05 ~ 5:00 (default value 0:30)Charge Voltage Precision:  ±0.001VDischarge Voltage Precision:  ±0.001VBalance voltage Prcision:  ±0.001VCharge shift efficiency:  ≥ 80%Charger consumed power:  ≤ 1.8W(12V 0.15A)Suitable battery type: 1Cells ~ 6Cells(Working well with LiPo\/ Lilo \/ Life)BC168 Parallel Charging Board:* Circuit board with thick copper technology 2Oz、 bold double-sided alignment、 greatly enhanced over current capacity.* Using high temperature silicone cable 18AWG wire、 the connection line conductive resistance is greatly reduced.* 12 interfaces 2S、 3S 8 interfaces、 interfaces 4 4S、 5S interfaces 4、 4 6S interfaces.Note: Before using the board and charge a plurality of batteries are charged in parallel、 the need to detect the voltage difference between the individual battery pack when the difference is greater than 0.1V、 and can not be used directly charging plate charging、 the voltage balance required by one battery pack、 make voltage differences between the battery pack in less than 0.1V、 and can use rechargeable batteries are charged in parallel plate. Otherwise、 it may burn and rechargeable battery pack or plate.It does not include power supply and charger adapter.Features:1. The charger is design for Li-polymer and Lithium Cell. Available to charge、 balance、 discharge、 measure the series batteries accurately.2. The charger will use big LCD screen、 available to indicate 6 Cell battery statuses.3. The charger use 4 button controls all function. 3 of the buttons are shortcut key、 only need to press and then can finish charge、 fast charge、 balance、 discharge all functions.4. This charger use high-precision battery detects PCB、 the voltage control accuracy reach ±0.001V. the current control accuracy reach ±0.1A based on any situation of the battery. Once finished the discharge、 the voltage tolerance of battery will be &le