New model of 808 Car Key Chain Micro Camera
Function: Camera + Taking Photo + Audio only +PC Camera + AV out
Video format: AVI
Video encoding: M-JPEG
Video resolution: 1280*720P
Video frame rate: Full 30fps
PC Camera: 1280*720
Media playing software: Mainstream audio and video media playing software, recommend Media player and Kmplayer software
Picture format: JPG
Picture pixels: 2048*1536
The ratio of image: 4:3
Supporting system: Windows me/2000/xp/2003/vista, Mac OS10.4 (uncertainty, depends on the computer model)
charge pressure: DC-5V
Interface type: Mini 8Pin
Storage support: Support external Micro SD card (TF Card) Max. to 32GB
Battery type: high-capacity lithium polymer 280mAh Battery
Super mini size: only around 50mm (L) x 32mm (W) x13mm (H)
Super light-weighted: only approx 17g!
Multifunctione: you can use it as a mini DVR, a camera, a webcam , a removable USB drive.
A. ON/OFF: Press On/Off button for 2 seconds to turn on the device. Then the red and blue light is both on , after few seconds, the red light off, the blue light is solid, the device at the standby status, press the On/Off button for 2 second again , the lights will be turned off. The device will automatically save the current file and shutdown.
B. Recording Video: Turn on the device, when at standby status, press Video/Photo button for 2 seconds to start video recording, the red light will start blinking 3 times and turn off during video recording, press any key of keychain to stop recording and save file, the blue light is on and at standby status. The system will automatically save file every 20 minutes once, and continue the video recording.
Note: Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera. In order to ensure good sound effect of recording, do not block the microphone hole.
C. Take photo: At standby status, Press Video/Photo button, the indicator red light flashes one time to complete the photo taking and image saving. Then it returns to the standby status.
Note: Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.
D. Audio-only : At standby status, press On/Off button to start audio recording, the red light will start blinking 3 times and turn off during audio recording, press any key of keychain to stop recording and save file, the blue light is on and enter into standby status.
E. Removable Disk: Please do insert your Micro-SD card to keychain device in the shutdown mode or standby status, and connect device with computer, the computer will pop up removable disk logo, need to uninstall the device, please click on the task bar on the bottom right corner of the icon to the management of removable devices, uninstall the inside removable storage devices, when the system recognizes the hardware can be safely pulled out, and then disconnect the Keychain and computer connections.
Note: According to a computer or system configuration differences, the time to identify removable disk will be slightly different, please be patient, this period is best not to carry out the operation of the camera, so as to avoid the impact of the computer hardware identification. If did not identify to a removable disk for a long time, try to re-insert, if still unable to identify the hardware, make sure that your operating system, driver, Mini 8Pin USB port interface cable are all normal; please uninstall the hardware with the normal process, so as to avoid to damage the computer or device.
F. PC Camera : Please take out your Micro SD Card from the Keychain device and connect device to computer with USB cable, then there is disk of , double click it, and appearing a “Standard_Camera” video screen.
G. AV-OUT function: In the mode of standby status, connect the keychain device with USB cable and plug the TV-out port to TV device, there is full screen video on TV, can be used as the CCTV or other operation.
H. Charge: Connect to computer USB interface or charger. During the charging, the red light flashes. When the battery is fully recharged, the red light is on.
Note: The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time. In order to maximize the capacity of storage battery, please continue to charge for 30 minutes to 1 hour after the indicator light long bright.
I. Troubleshooting:
When the storage space is insufficient, the Indicator light is on under its standby status accordingly, then automatically save the current files and shut down. If you want to continue to use this video recorder, copy the necessary files to computer and delete the old documents in storage in order to free up enough storage space;
When the battery is insufficient, the red light flashing fast and then turn off, then automatically save the current files and shut down. If you want to continue to use the recorder, please charge the battery.
If the video recorder stops responding due to improper operation or other unexpected reason, please press the reset button to restart the device.







