Specification:








Product name:

LiitoKala Lii-500 1.2V\/3.7V Battery Charger



Brand:

LiitoKala



Model:

Lii-500



DC Input voltage:

12V \/ 2.0A



Discharge current:

250mA， 500mA



Li-ion battery charging current:

4.2V 300mA \/ 500mA \/ 700mA \/ 1000mA



NiMH battery charging current:

1.48V 300mA \/ 500mA \/ 700mA \/ 1000mA



Compatible Batteries:

18650，26650，14500， AA， AAA， etc.(not included)



USB Output:

5V --- 1000mA



Termination:

Intelligent voltage monitoring



Weight:

305g+120g+32g



Size:

162mm(L) x 96mm(W) x 36mm(H)




Features:
1. Four kinds of charge current regulation (300mA \/ 500mA \/ 700mA \/ 1000mA)
2. It can be of different size batteries while charging(18650\/26650!#!amp!*!hellip;!#!amp!*!hellip;\/AA\/AAA)
3. The charger preclude the use of a separate screen LCD display， voltage (V) Current (mA) Time (h) Capacity (mAh) resistance (mR)
4. Under charge mode， 4 channel work independently， you can select different charging current for charging and Hunching lithium-ion batteries and nickel-metal hydride batteries.
5. FAST TEST mode， 4 channels can quickly detect the battery capacity， regardless of the lithium-ion batteries and nickel-hydrogen batteries， are working independently. Rapid detection of battery capacity process (1 discharge， 2 full) by the two step
6. NOR TEST mode， the battery capacity is normally detected by the three step process (1 first charged， then discharged 2 and 3 refill)， the detection process of the battery capacity;
7. CHARGE and FAST TEST \/ NOR TEST 3 modes can work simultaneously; independent set charge \/ fast capacity detection \/ normal capacity detection;
8. A variety of protection functions: overcharge and over discharge， short circuit， temperature， 0V voltage activation function， (- !#!amp!*!Delta;V !#!amp!*!amp; 0!#!amp!*!Delta;V)， 1.65V-2.2V can not be charged， intelligent recognition bad battery and reverse-battery detection protection.
9. With standard 5V \/ 1000 mA USB output: from 1 to 4 lithium batteries lithium batteries USB output is completed， the product can not be nickel-metal hydride battery with USB output.

Description of the keys:
1. The charger has six buttons， mode selection key (MODE)， the current selection key (CURREN)， and view the data independently selected key (1234)， the use of simple and convenient;
2. Hold down the MODE key in any case and held for 3 seconds to change the CHARGE (charge) mode or FAST TEST， NOR TEST (capacity test) mode， then tap again corresponding to the function keys can be changed within 8 seconds， to current， independent， Hunchong， capacity test， the selected function after 8 seconds into the working state， in working condition can tap the (1234) key to view the current (mA) \/ capacity (mAh) \/ voltage (V) \/ time ( h) \/ resista