Engine coatings (oil additive)Excellent for all vehicles; gasoline, di_esel, & LPG

For sedan or light-sized truck, for which the maximum volume of the engine oil is less than 6 L, put one bottle of Protec (500 ml) into the vehicle engine. The efficient Protec-to-engine oil ratio is 8% to 13%.

1. Reduction of metal-to-metal friction: provides cushion between moving engine parts. 2. Reduction of abrasion phenomenon: protects against engine wear by forming a protective coating membrane.3. Prevention of overheating: performs superior lubrication and prevents overloading. 4. Improvement of performance: lessens friction-induced overload and vibration.5. Reduction of noise: cushions noisy cylinders of vehicles.6. Reduction of fuel consumption: fuel-saving effect by enhancing engine performance and reducing engine stop-leak.

Protec is just an amazing oil additive! Protec is formulated from the finest products by our own blending technologies. Protec is proud to be the best oil additive in the domestic market, where imported products had been mainly prevalent. This anti-wear oil additive, when it is applied, is noted to protect further abrasion and friction on the vehicle's engine. With regular use of Protec, all types of new cars can keep their virgin engines new until they are out of service. Protec can be applied to all types of engines, whether they are new or not. Protec is distinguished in that it is manufactured by a specialized process using exclusively synthetic hydrocarbons and purified minerals, meaning it does not contain PTFE materials; while other imported additives contain PTFE-like solidified material, which causes side effects such as oil filter blockage. Protec was designed from understanding the surface activity requirements of the best oil additive.Protec will be more effective, when the vehicle is virgin. You need no idling to circulate engine oil after the injection of Protec, and just travelling 200-300 km makes the coating agents cover all the engine surface. Its effect covers 30,000-50,000 km, which may vary according to driving circumstances.

★Evidence-based

1.Trace of wear after Extreme Pressure Test (TIM KEN)

The mixture of 10% of Protech with engine oil was noted to show higher anti-wear results in Extreme Pressure Test compared to other conventional additives.

Engine oil only Engine oil + MOS2 10% Engine oil + PTFE 30% Engine oil + Protech

★Coating mechanism

Fast Mixing & Fast Infiltration Fast Adhesion on Surface Fast Membrane Formation

Fast Mixing & Fast Infiltration Fast Adhesion on Surface Fast Membrane Formation

★Effects:

-Better for extreme condition. (Over-speeding, Long distances)

-Noise-reducing by putting into manual transmission and differential gear box.

-Increasing hydraulic effect when put into power oil and hydraulic oil.

-Fuel saving up to 5%.

-Extend the oil changing cycle up to 20,000Km.

-Keeping the coating effect up to 30,000Km with 1time put.

-More Effective when put into a new car or after boring.

-Not contain PTFE materials, No Side Effect.

★Usage

1. Dosage: for sedan or light-sized truck, for which the maximum volume of the engine oil is less than 6 L, put one bottle of Protec (500 ml) into the vehicle engine.

100ml- motorcycle (4-wheel motorcycle)
500mL- sedan, mini-van, light-sized truck
1L- large truck, bus, heavy machinery
20L-ship

Add rate: Please put the engine coating agent 8~13%
of the volume of engine oil to engine oil inlet.
2. Use every oil change.
3. Inject Protec into engine oil filler hole. The efficient Protec-to-oil ratio is 8% to 13%.
It needs no idling.
4. Protec can be applicable anytime from the replacement to travelling less than 20,000 km.

●Korean review ( Korea Best of coating product)