Gives offset between worktop jig and guide bush for ease of setting up. Allows true cutter path to be drawn. Scribes directly onto worktop
Ideal for kitchen worktop jigs
Spring loaded pencil

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 1.34 inch
Height : 0.47 inch
Length : 6.06 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0.32 ounce (View shipping rates and policies)

ASIN : B003UGQ78U

Product Description

The Offset Scriber can be used to trace the male cut on the worktop. The drawn line will need to be on the side that the jig is to be positioned for routing. For a right hand joint the pencil line needs to be on the underside of the male worktop. I.e., for a left hand joint the pencil line needs to be on the top of the male worktop. Cut female joint as normal following the instructions supplied with the worktop jig, then lay male piece on top for right hand joint or underneath for left hand joint. Use the Offset Scriber to trace the female cut by pushing the tool body down so the spring-loaded pencil contacts the worktop. The pencil line on the center worktop will show the final cut line. If the worktop is dark, place masking tape on worktop and draw onto this. Lay jig onto worktop and align the correct edge of the slot on the jig to the pencil line, clamp jig securely and then cut the male joint following the instructions supplied with the worktop jig. Size=1 7/8 inch x 5/8 inch x 5/32 inch. For board thickness =5/16 inch - 5/32 inch.