MakerBot MP05783 Warm Gray PLA Large Spool / 1.75mm / 1.8mm Filament for MakerBot Replicator 5th Gen

Description:; The 1.75mm warm gray PLA Filament (Large Spool) from MakerBot is a bioplastic derived from corn. Its guaranteed not to have any heavy metals, phthalates, or BPA (Bisphenol A). The large spool provides 2 lbs (0.9kg) of PLA plastic filament.; The MakerBot PLA Filament is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that the MakerBot MakerWare software offers and will reliably slice and print every type of 3D printing available.; If youre new to 3D printing, the MakerBot PLA Filament is a good material to start with. The MakerBot PLA Filament also adheres well to acrylic and to blue painters tape. Prints with a large bottom may have a tendency to curl. To prevent curling, use rafts.; To ensure high filament quality and performance, store the MakerBot PLA Filament in a cool, dry place when not in use. This is because the MakerBot PLA Filament will Technical Information: Color ; Warm Gray ; Compatible Printers ; MakerBot Replicator 5th-Generation; MakerBot Replicator Z18; MakerBot Replicator 2 ; Temperature ; Glass Temperature; 140 - 149F / 60 - 65C ; Melting Temperature; 302 - 320F / 150 - 160C ; Nozzle Temperature; 446F / 230C ; Dimensions ; Spool Diameter; 9.84" / 25.00 cm ; Spool Width; 1.57" / 4.00 cm ; Spool Hub Hole; 2.00" / 5.08 cm ; Diameter; 0.068" / 0.175 cm ;