Package included:
2x P800 Sanding Discs 2x 3.0ml Protect Liquid
2x P1200 Sanding Discs 1x Mask tape
2x P2000 Sanding Discs 1x Backer pad M10 thread
1x Sponge Disc Orange 1x Adapter
2x 40gm Polish Paste 1x Sponge Disc White

Car Motorcycle Cleaning Restoration Kit
1. Prepare:
Clean the lens with water, tape the surrounding of the lens to avoid scratches.
2. Sanding
Wet the sanding disc and attach it to the backer pad. Sands with three different grits to make a completely removal of the heavy yellowing, fading and corrosion.
(Note: Use the sanding disc from coarse to fine: P800-P1200-P2000, otherwise will result in failure)
3. Polishing
Attach the sponge disc to the backer pad, apply the polish paste(step 2) to lens and polish till shining as original condition.
Note: If polish by hand. your're suggested to polish no less than 200 circles clock wise. Will results better is do with a polish machine.
4. Protection
Clean the headlight lens and make sure the lens is dry enough before protection step.Using a sponge disc white provided by kit, evenly apply the protect liquid(step 3)on the surface of lens under shadow.Protect liquid will form a magic layer on the headlight surface when it fully dry. Fully dry will need 2 hour under directly sunshine.

Note:
After step 3, keep the lens dry and don't wash the car within 24 hours.