X3000 Mini PC Player Kits For Raspberry Pi 3 Model B \/ 2B \/ B+ \/ A+Feature:- Compatible with Raspberry Pi 3 Model B\/ Pi 2B\/ A+\/ B+- Operating System: Raspbian Jessie \/ OSMC \/ Openelec \/ Volumio ...etc- Power Supply: AC 90 ~ 240V input、 DC 5V 3A output- Turn on \/ off with 2-second touch- Colorful breathing light- With internal cooling fan for laptop- Adopt original high-quality TI Chips(TI TPA6133A)I\/O Ports:- USB 2.0 x4- Micro USB port  x1 (MSATA SSD external access with PC、 MAC)- Mini HDMI- 10\/100 Ethernet RJ45 jack- 3.5mm Audio jack ( HDMI audio output and  5.1CH SPDIF optical output)- MSATA port (Supports up to 1TB MSATA internal SSD)Wireless:     - WIFI (IEEE 802.11b\/g\/n、 Internal 2.4GHz antenna)- Built in IR sensor (38KHz、 GPIO2 used)Know more about this item、 please click: http:\/\/www.raspberrypiwiki.com\/index.php\/X3000_Mini_PC_KitsNote:- This product has already been assembled.- The Raspberry Pi main board is not included.Packing included: 1 x Mini PC Kits1 x US Plug Power Adapter(cable length: about 118cm)1 x Screw Kits1 x Mini HDMI Cable (cable length: about 145cm)1 x Micro USB Cable(cable length: about 93cm)1 x HDMI daughter board1 x USB daughter board1 x Vesa HolderHow to use:1. Fitting the Raspberry Pi  MSATA SSD should be installed before fitting the Rpi Step 1: Connect the power & IR cable from Raspberry Pi to the 2-pin male pin header Sept 2: Plugs the HDMI daughter board into the 14-pin HDMI female pin header Step 3: Connect the cable of USB daughter board to the 3-pin PH connector Step 4: Screwing the Raspberry Pi board2. Power on \/ offTo turn on:Touch the power symbol and hold until the colorful breathing light is ON.To shutdown:A. Power off your system using the system menu - IMPORTANT!B. Touch the power symbol and hold until the colorful breathing light is OFF.C. It is recommended to unplug the power supply unit when you are not using it.