Color	Golden Yellow
Quantity	1 Piece
Material	Aluminum-magnesium alloy
Form Factor	Others、2230/2242/2260/2280
Interface	Others、USB3.1 Type-C
Powered By	AC Charger
Supports Max. Capacity	800 GB
Slot Number	2
Max Sequential Read	800MB/sec
Max Sequential Write	800MB/sec
Other Features	1.Support Raid0、 Raid1、 PM three models.2.Support System: All WINDOWS / Linux / Mac.3.Hard drive: for KEY B NGFF SSD SATA protocol
Certification	CE
Packing List	1 x MSATA SSD RAID HDD Enclosure 1 x Data cable (cable length: 25cm)

Name: USB3.1 Type C to 2 Ports NGFF (M.2) SSD Raid HDD Enclosure

Function: while extending through USB3.1 Type-C interface to the two NGFF (M.2) interfaces、 two NGFF (M.2) interface can simultaneously access two 2230、2242、2260 or 2280 specification SSD hard drive. You can form between two SSD Raid0、 Raid1 or PM mode.



Product Description:

      (1) USB3.1 Type-C Interface: LR31-1352N adopted recently APPLE、 Intel、 Microsoft and other leading manufacturers to promote the USB3.1 TYPE C interface theoretical transfer speeds of up to 10Gbps; faster than USB3.0 transfer speeds 1 times、 while USB3.1 TYPE C interface supports both positive and negative plug、 not required on the direction that the front and back insert can complete the pairing、 which greatly improves the ease of USB interface.



     (2) compatible SSD Specifications: LR31-1352N compatible NGFF (M.2) SSD interface. Currently on the market NGFF (M.2) SSD distinguished by volume There are four main specifications、 2230、2242、2260 and 2280 respectively、 two kinds of SSD .LR31-1352N used to fix pillars mobile (factory default settings shipment 2280)、 perfectly compatible 2230、2242、2260 or 2280 SSD hard disk、 arbitrary.

     (3) SSD operating mode settings: LR31-1352N support Raid0、 Raid1 and PM three operating modes. General factory default shipping mode Raid0、 factory work settings can be changed according to customer demand.



Raid0: We all know、 USB3.1 theoretical transfer rate of 10Gbps、 while NGFF (M.2) actually taking the SATA signal、 the current maximum theoretical transfer speed of SATA is 6Gbps. For USB3.1 of 10Gbps for、 SATA USB3.1 speed can not satisfy the appetite. Therefore、 in order to solve the USB3.1 SATA speed run、 but the question、 we LR31-1352S specifically set a Raid0 operating mode. In Raid0 mode、 two hard disk into a hard disk、 and adding capacity、 doubling the speed.



Raid1: When the name suggests is disk mirroring、 in Raid1 mode、 when simultaneously connected to two SSD hard drive、 can only show relatively small capacity SSD、 the entire disk capacity is smaller、 but the data in the work、 but a backup、 data more stable.



PM: also known as disk arrays、 are independent between each disk、 while simultaneously connected to two SSD hard drive、 hard disk capacity between two constant speed constant.



Plug USB3.1 data cable、 check the working status of SSD

A.LED1 steady indicating that the computer has detected SSD1、 LED1 blinks indicate SSD1 is in written or read state otherwise abnormal

B.LED2 steady indicating that the computer has detected SSD2、 LED2 blinking indicates SSD1 is in written or read state otherwise abnormal

Dimensions: 4.25 in x 1.97 in x 0.43 in (10.8 cm x 5.0 cm x 1.1 cm)
Weight: 2.19 oz (62 g)