The Frame2.0 Filter 3-Pack is the ultimate filter kit for quadcopter and filming outside the GoPro housing. Included in this kit are Polarizer Filter, 2-Stop neutral density filter, and a 3-Stop neutral density filter. These filters not only improve image quality they also protect your GoPro lens while outside of the housing. These filters were designed to be extremely low profile and ultra-light, weighing only 6.7 grams which is perfect for most gimbals. 

Improve the quality of your aerial footage with the DJI Phantom 4 / Phantom 3 Filter 3-Pack from Polar Pro. The pack includes a polarizer filer, 2-stop neutral density filter, and 3-stop neutral density filter, all designed specifically for the camera lens of the DJI Phantom 4 / Phantom 3. Offering varying degrees of light reduction, the filters are useful for slowing down the camera's shutter speed, resulting in smoother looking motion and helping to reduce the appearance of rolling shutter.

The filters all feature glass lenses for optimal image quality and scratch resistance, a low-profile design, and are lightweight at approximately 0.1 oz ounces for the heaviest filter, so they won't interfere with the camera's gimbal system.

Works with the Phantom 4 and well as the Phantom 3 Professional, Phantom 3 Advanced, and Phantom 3 4K.

Note: Does not work with the Phantom 3 Standard.

Polarizer Filter (Lightest Shade)

The Polarizer Filter is perfect for reducing glare, and improving color saturation. When filming from a quadcopter, a large amount of light is reflected back up towards the camera, the Polarizer will reduce the amount of glare bouncing off the ground, leaving behind the most crisp footage possible. The Polarizer can also be used to slow down the cameras shutter speed by 1.6 stops. For night photos this can be especially useful in slowing down the Hero4's shutter speed. 

Neutral Density 2-Stop (Mid Shade)

This is probably the most common filter for filming outdoors or from the sky. The 2-stop ND filter reduces the cameras shutter speed by 2-stops which smoothes out quadcopter video, by reducing rolling shutter (commonly referred to as the Jell-O effect). The 2-Stop ND is also used for reducing lens flare while shooting into the sun or toning down highlights while filming outdoors. We usually use the 2-Stop ND filter when it is partly cloudy, and during the early morning or evening hours. This filter can also be used to slow down the shutter speed while shooting in Night Mode on the Hero4 for more balanced exposures. 

Neutral Density 3-Stop (Darkest Shade)

The 3-Stop ND filter is designed for filming in very bright conditions. This ND filter will reduce severe Jell-O effect (i.e. rolling shutter), smoothing out high vibration quadcopter footage. We use the 3-Stop ND filter when filming during the middle of a sunny day or to reduct the shutter speed to create motion blur.