New Hot Single  AC 220V Multifunctional Switch Wireless Learning Remote Control Switch Top Quality

Features:
100% neq brand and high quality
iT IS useful and will give you more convenience

Specifications:
Load type: taped: lighting， electrical， electronics， and other loads.
Input voltage: AC 220V， 50-60HZ [This product can be long-term stability in: within the grid voltage range 180-240V apply to the national power grid]
Output voltage: AC 220v
Working Mode: Auto Lock / Interlock / Non-lock [can switch through the key learning， there are instructions posted on the back of the product]
Extensions: Total On / Total Off / delay [to achieve the total open / total off / delay of 1 minute function， the instructions affixed to the back of the product]
Caller Status: Default call off / can be set to call up / Caller memories [can be selected via the pin free on board， there are instructions posted on the above products]
Output Device: Relay [normally open contact， the maximum allowable current: 10A / 250VAC]
Load power: resistive load: ≤750W [eg: incandescent， water heaters， electric wire， etc.]， inductive load: ≤500W [eg: motors， pumps， fans， fluorescent and other inductive]， mixed load: ≤240W [such as: energy saving lamps， ceiling lamps， electronic fluorescent lamp]， LED lights ≤180W. Note: This product momentary maximum allowable power 1500W， long-term security and stability of power shall be subject to the above-mentioned parameters
Shell Size: approx 68 × 34 × 23mm
Color: black $ white
Net weight: 65g

Packing list:
1X Wireless Remote Control Switch
1X Receiver