6-Channel Mixing Console: Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereo) / 1 Stereo Bus

Feature-rich and delivering outstanding sound quality, the Yamaha MG06 analog mixer is well-suited for ultra-compact mixing rigs. The MG06's quality op-amp ensures that your mix sounds transparent and articulate. The MG06's crystal clear D-PRE preamps will squeeze every drop of tone from your mics, with natural-sounding bass and smooth highs. Featuring switchable phantom power, a pad switch, EQ, and LED metering, the tiny MG06 can take on just about any task you throw at it. Utilizing many state-of-the-art features from Yamaha's high-end consoles, the MG06 is ready to work for you!

Yamaha MG06 Analog Mixer at a Glance:

• D-PRE discrete Class-A mic preamps deliver clean and natural sound
• EQ and highpass filters allow for effective sound-shaping
• High quality op-amp ensures transparent sound reproduction

D-PRE discrete Class-A mic preamps deliver clean and natural sound

Nobody wants to hear mics that are plugged into thin, distorted, or underpowered preamps. MG Series mixing consoles employ Yamaha's transparent D-PRE preamps, which provide more power with lower impedance, delivering natural-sounding bass and smooth highs. D-PREs simply sound good - without hyping any specific elements of your mix. The D-PRE's pure sound will ensure that you won't need to spend hours EQ-ing just to get a barely-acceptable sound, like you would with low-quality mic preamps.

EQ and highpass filter allow for effective sound-shaping

Whether you're tweaking your sound to perfection or whether you're removing some unwanted frequencies, effective and powerful EQ is necessary for building a successful mix. Featuring equalizers on all mono channels, the Yamaha MG Series mixing consoles provides you with ample control over the tonal balance of your mix. Additionally, a highpass filter allows you to get rid of any mud that might be present in your mix by eliminating unwanted low-frequency noise.

FEATURES

6-Channel Mixing Console
Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereo)
1 Stereo Bus
“D-PRE” mic preamps with an inverted Darlington circuit
XLR balanced outputs
PAD switch on mono inputs
+48V phantom power
Metal chassis
Dimensions(W×H×D): 149 mm x 62 mm x 202 mm (5.9"x 2.4"x 7.9")
Net Weight: 0.9 kg (1.98 lbs.)

SPECIFICATIONS

Outline

I/O	Phantom power	+48 V
Input Channels	Mono[MIC/LINE]	2
Input Channels	Stereo[LINE]	2
Output Channels	STEREO OUT	2
Output Channels	PHONES	1
Bus		Stereo: 1
Input Channel Function	PAD	26 dB (Mono)
	HPF	80 Hz, 12 dB/oct (Mono)
	EQ HIGH	(Mono) Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
	EQ LOW	(Mono) Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
	PEAK LED	LED turns on when post EQ signal reaches 3 dB below clipping
	Level Meter	2 x 7 -segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]

General specifications

Total harmonic distortion		0.01 % @ +8dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +18dBu (1kHz), GAIN knob: Min
Frequency response		+0.5 dB/-0.5 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level	Equivalent input noise	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
	Residual output noise	-102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
Crosstalk		-88 dB
Power requirements		PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, Cable length = 1.5 m), 100 V-240 V, 50 Hz/60 Hz or equivalent recommended by Yamaha
Power consumption		12 W
Dimensions	W	149 mm (5.9")
	H	62 mm (2.4")
	D	202 mm (7.9")
Net weight		0.9 kg (1.98 lbs.)
Accessories		Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A
Others		Operating Temperature: 0 to +40˚C

All of our YAMAHA MG06 analog mixer comes with a 1 year local warranty