Instructions for Installing the Replacement Touch Screen of iPhone:
Things You´ll Need:SIM removal tool, Phillips screwdriver, Pry stick, iPhone 4 touch screen digitizer

1. Turn off your iPhone, insert one end of the SIM removal tool into the small hole at the right side of the iPhone. Push the end of the removal tool into the hole until the SIM tray pops out a little from the lid. Pull the SIM tray out and set it aside.

2. Then use the Phillips screwdriver to remove the two screws surrounding the dock connector on the bottom of theiPhone. Flip the device over so it is face down on your work surface.

3. It is easy enough to push away the back cover after remove the screws. Please push away the back cover upward. Then, we will remove the battery.

4. Next, we will remove the EMI electromagnetic shielding case. There are dense components after removing the 4 fixed screws.

5. We would still remove the other EMI electromagnetic shielding case located in the middle of phone and the inner flex cable. All of these need to pry up carefully with the special designed tool. Please pry up the flex cable in the iPhone 4.

6. There is a small part fixed with screws on the upper right corner, it´s vibration motor of iPhone.

7. We should remove screws and cables before dismounting the main board, and take down other iPhone´s parts, such as camera, loudspeaker and so on. Pry up the connective parts on the iPhone 4 and take down the camera.

8. Remove the larger module on the bottom and it´s a loudspeaker module.

9. Then take down the main board of iPhone 4.

10. This is a second microphone and VGA camera.

11. Then we could pry up the front panel.

12. Due to the complexity of iPhone structures, the screen of iPhone 4 compact with its panel,it is hard to seperate them, suggest you that seek the professional for dismantling your phone, otherwise it may be easy broken.

Description

Great replacement that fits like a glove!

As Apple products are prevailing, iPhone wins many fans. Valuable iPhone requires tender care in daily life. Sometimes bumps or drops are unavoidable, your iPhone may suffer from cracks or scratches. Don´t worry. This Touch Screen Replacement with Tools Kit is a good choice to save your iPhone. The touch screen replacement is as new as the original one and features high quality. It will definitely give your iPhone a new look. And with the help of the tools, you can handle it effortlessly.

FEATURES

New Touch Screen Digitizer Replacement

High quality replacement touch screen digitizer for iphone 4
Each screen is tested before shipping and working
Repair / replacing old, broken, cracked, damaged faulty touch screen

Repair Opening Pry Tools Kit Set

Repair and replace your apple iPhone 4 screen without damaging your phone
Use the included section vacuum opener so you don´t leave marks or chipping your phone housing
Unscrew 2 screws at the bottom of the iPhone on either side of charging port
Remove the screen with the suction tool
Remove the additional screws to disassemble the main LCD from the digitizer and glass

Specifications

Color	White
Compatible with	iPhone 4
Size	11.5 x 5.8cm / 4.53" x 2.28" (L x W)
Weight	0.88oz / 25g

Package Includes

1 x Touch Screen Replacement
1 x Tools Kit Set

Extra Info

Note:
1. Due to the complexity of iPhone structures, suggest you that seek the professional for dismantling your phone, otherwise it may be easy broken
2. A technician or expert is recommended for the installation, we are not responsible for any damage caused by installation of this accessory