Weight:112g Dimension:3.62in*2.2in*1.3in(9.2cm*5.6cm*3.3cm) Brand:Navo Model:N/A Color:Yellow+Black Quantity:1Piece Material:PCB Certification:QC Driver:L298N Dual H Bridge DC Motor Driver Driver Terminal Power Supply: +5 V ~ +35 V; (If you need power from the board， it should be +7V~+35V.) Peak Current of the Drive Part:2A Current of the Logic Part:0~36mA Control Signal Input Voltage:Low:-0.3V ≤ Vin ≤ 1.5V; High: 2.3V ≤ Vin ≤ Vss Enable Signal Input Voltage:Low: -0.3 ≤ Vin ≤ 1.5V (control signal is inactive); High: 2.3V ≤ Vin ≤ Vss (control signal active) Maximum Power Consumption: 20W ( at 75℃) Storage Temperature: -25℃ ~ +130 ℃ Other Extensions:Control indication light， logic unit power supply interface. Features: The drive module is made of brand new L298N chip of ST company， working stably by SMT technics and firmly circuit. It can drive directly two 3-30V DC equipments and supply 5V output， and supply power for 5V microcontroller unit. It can support 3.3V MCU ARM control so as to change the speed and direction. Also it is suitable for 2-phase stepper， 5-phase 4-shot stepper and widely used in intelligent cars. Packing List: 1 x Driver Module<img src="//112.74.112.28/down/products/427542/427542_000.jpg">