Product desc for this DIY 9H coating:
TEV Auto Premium 9H Coating Product series will protect the clear coat and base color from ultra violet rays and acid rains, preventing them from degradation and color fading.
At the same time it specially formulated for metal surfaces, usable on aluminum & stainless steel parts.
TEV Auto Premium 9H Coating formed a hardness of 9H withstanding heats, brake dust and abrasions; protects coated surface from ageing, oxidization, rusting and avoid any permanent stain marks. Sustain chrome mirror glossy finishing outlook.
It enabled the painted surface look as glossy as a new cars/bicycle/bike even 5 years later. Besides that, stains would be hardly get stuck on the surface due to the super hydrophobicity of the coated surface, even it is stained, it can be easily removed by plain water flushing and rinsing.
No matter cars, bikes or bicycle, all are suitable for this coating.
Professional Coating Set for Sale | DIY
Instruction manual included | Step by step guide
High reflection Coated surface with this High hardness coating, up to 9H Hardness.
(Polish your car if require)
Specifications of Car Coating DIY Set Hardness 9H
- 1 x bottle of 9H coating
- 1 x Microfiber towel
- 1 x DIY instruction manual
- 2 x coating sponge
- 4 x coating tissue for application
|
|
| Form Gel |
Liquid |
|
|
| Model |
TEV |
| Size (L x W x H) |
5 x 12 x 15 |
| Weight |
0.2 |
| Type Care |
Exterior Hard Coating |
| Warranty Period |
No Warranty |
| Warranty Type |
- |
Product details of Car Coating DIY Set Hardness 9H
Suitable for all metal surface.
To apply on body please use very thin layer of application due to high hardness up to 9H.
Application
1.
Shake the bottle for 20 seconds before use.
2.
Soak the coating onto the application sponge or dry application tissue/towel.
3.
Apply small section at a time by dragging the coating horizontally (Left to Right) once and vertically (Top to Bottom) once. Make sure the coating covers every part of the surface.
4.
Immediately, use a microfiber cloth to buff the coated surface,do not pressurize the buffing process. Buff off completely
until there is no visible striking or lining. (If you have hard time buffing off the striking and lining, recoat the particular surface again with step 3)
5.
Wait for a minimum of 4 hours for the coating to cure and bond with your surface; for best performance, allowing the
coating to cure for 72 hours.
6.
Washable after 7 days.
7.
If you wish to apply a second layer coat, Repeat Step 3 to 4 after 4 hours.