Product specifications
<br />1. Induction mode: human infrared sensor
<br />2. Inductive control: built-in light sensor (photosensitive resistor)
<br />3. Sensing distance: 3-5 meters range
<br />4. Sensing angle: within 120 degrees
<br />5.LED life: 80,000 hours or more
<br />6.LED power: 0.8W
<br />7. Light color: white / warm light (optional)
<br />8. Working current: 120 mA
<br />9. Operating voltage: DC3-6V
<br />10. Standby current: less than 50UA
<br />11. Battery capacity: 500mAh (A battery, enough)
<br />12. Battery use: charge and discharge more than 400 times
<br />13. Battery full use times: more than 600 times
<br />14. Delay time: 15 seconds (induction within the sensor can not be detected after 15 seconds to automatically turn off the light)
<br />15. Lamp temperature: -10 ~ 50  
<br />16. Product Size: Length 195mmX Width 32mmX Thickness 18mm
<br />17. Weight: 130 grams
<br />18. Packing number: 100 Packing size: 41 * 28 * 20CM Packing weight: 13 KG
<br />19. Scope of application:
<br />Suitable for bedroom, baby room, wardrobe, wardrobe, cabinet, corridor, workshop, basement, garage, staircase, oil warehouse, roof, door, garage entrance and other places.
<br />
<br />Product installation method:
<br />1. Double-sided adhesive paste
<br />2. Magnetic base
<br />3. Contains English instructions
<br />
<br />The package contains:
<br />1. 10LED sensor light
<br />2. USB charging cable
<br />3. English manual
<br />4. Install the magnetic stripe