Features:
1. LED time display.
2. 12/24 hour format selectable.
3. Alarm & snooze.
4. Temperature display in  ℃ or ℉ .
5. Mirror function .
6. Time & Temperature switch display.
7. 3 light luminance level.
8. Four function button (MODE，UP， DOWN， TOUCH KEY).
9. Time memory function (3XAAA batteries for time memory).

Specification:
Temperature range: 0℃ ~ 50℃
Night mode setting (18:00-06:00)
Power consumption:
3 x AAA batteries (excluded)
USB charging cable(included)
2 USB ports for charging mobile phone
The product size: Approx 13.4*4.5*11.2cm/5.27*1.77*4.4''
LED Color: White， Red， Blue， Green
When battery-on or power by USB cable，  a BI sound heard with LED light on.
When battery-on，touch  any button，the LED will light on for 5 seconds.
When plugged with USB cable， the LED light will be on always.

Function buttons:
a. Touch MODE button Switch displaying:: Time -> Temperature -> Alarm time ->Night mode ON/OFF
b. Touch UP button to switch the light in 3 levels.
c.  Under time mode，touch DOWN to activate/deactivate the alarm function.
e. Touch the touch key icon one to select one kind of RGB light ( red， orange， green， blue， skyblue， purple， white) ， and hold the touch key icon to make the RGB light changing automatically， and hold the touch key again to turn off the RGB light
d.RGB light only can be on when plugging the adaptor.

Operation:
1. Time setting:
a. Under time mode， hold MODE button to enter the time setting mode. The setting sequence: 12HR/24HR ->hour -> minute
b. During the setting process， the setting article will flick.
c. Touch UP once and ahead; hold UP for 2 seconds， go ahead at an 8 steps/second speed.
d. Touch  DOWN once and back; press for 2 seconds， go back at an 8 steps/second speed.
e. If choosing 12HR format，it will have PM display in the afternoon， but there is no AM to show the morning time.
f. Touch MODE button or without any operation within 10 seconds to confirm the setting and  go back to the normal display.

2. Alarm setting:
a. Under time mode， touch MODE for 3 times to enter alarm setting mode. Hold  MODE button，  the AL icon and and hour will flick，  then enter the alarm time setting mode，the setting sequence: hour -> minute -> snooze time (from 5-60 minutes)
b. During the setting process， the setting article will flick
c. Touch UP once and ahead; hold UP for 2 seconds， go ahead at an 8 steps/second speed.
d. Touch DOWN once and back; hold DOWN for 2 seconds， go back at an 8 steps/second speed.
e. During the setting process， the AL icon will flick.
f.   Touch MODE button or without any operation within 10 seconds to confirm the setting and  go back to the normal display.
G. When alarming， press any key to stop alarm.

3. When alarming:
a. Buzzer for 2 minutes (BIBIBIBI)
b. Touch MODE button will stop alarm and active snooze function， the AL icon will flick until it reach to next alarm time.
c. Touch UP and DOWN buttons to stop alarm. If AL icon stops flashing and turn off the alarm function.
d. When it is alarm time， the RGB light will flash together with alarming.

4. Snooze Function:
a. The default snooze interval time is 5 minute.
b. Under alarm mode， hold  MODE button to alarm setting， touch MODE for 3 times to enter snooze interval setting interface. The 05  flick， touch UP or DOWN button to set the interval time from 5-60 minutes.
c. Touch UP once and ahead; hold UP for 2 seconds， go ahead at an 8 step/second speed.
d. Touch  DOWN once and back; hold DOWN  for 2 seconds， go back at an 8 step/second speed.
e. When Alarming，touch MODE button will stop alarm and active snooze function， the AL icon will flick until it reach to next alarm time.
e. If only battery-on ，touch any  button， the LED light will light on for 5 second.

5. Night Mode function:
a. Night Mode means the LED display will automatically dim the luminance during night time.
b. During the time interface， touch MODE button for four times to enter Night Mode interface. Touch  UP or DOWN to turn on or off the night mode function
c. The default night mode period is 18:00 to 6:00
d. When night mode function in ON mode， hold MODE button to enter night mode setting . The setting sequence: start hour -> start minute -> stop hour -> stop minute

6. Luminance level setting:
a. Three luminance level
b. The default is bright level
c. Touch UP button to switch in dim level.

7. Temperature display:
a. Under time mode， touch MODE button  to display the temperature. Touch UP button to switch the the temperature display  between ℃/℉ unit.
b. Under temperature mode， hold MODE button until the BI sound heard. The LED will switch display: temperature( 5 seconds) -> time (10 seconds) -> repeat.
c. Hold MODE button again until the BI sound heard， it will back to time mode.

Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light， the picture may not show the actual color