Product Description

Why did the color can not change?
1. The temperature have not reach 31 degree.
2.Your Nails are too short, which color-change is not obvious.
3.More Higher temperature , more obvious the color change.

Why did the polish chip / peel off quickly ?

1,Not file the nail slightly. if you want the polish last longer,the first step is important,file the nail and keep them dry.
2,May be your base and top coat are not good quality. Our brand base and top coat will be better,it is professional combination . if wear our polish,it is better to combine our brand base and top.
3,Base and top wear too thick or inhomogeneous then it will peel off easily.

PROFESSIONAL USAGE:

1. Clean Nails then trim nail surface as normal manicure process.
2. Fully shake up the polish; it can make the polish color be balanced. (Important)
3. Apply Base Gel first, which can make polish lasting longer, cure with UV lamp or LED lamp. (Necessary)
4. Apply polish directly, cure with UV lamp for 2-3 minutes or cure with LED lamp for 60 second; when dry, apply the 2nd layer and cure with UV lamp or LED lamp again.
5. Coat with removable topcoat, which can make color shinier, cure by UV lamp or LED lamp.
6. Remove the tacky residue on nails with the cleanser.

REMINDER:
Use cleanser remover to remove the sticky layer above base gel and topcoat after curing.
Don't apply too thick. If you feel the color too dark, just apply one layer is okay. When apply, please pay attention to wrapping edge.

To remove:
1.Soak off the nails into acrylic remover for about 5 minutes,
2.Rip down the whole piece of nail enamel gently on each nail.

Feature

A really fun product, color amazingly changes with temperature changing.
when nail tip is higher than 31°C, warm color show, lower than 31°C, cold color show.
With a proper application, you can get 2-3 WEEKS high-gloss wear !!
WARM TIPS: With gilitter, product is thick (normal phenomenon), stiring the gel and paint a thinner layer to reach the advertisment effect.
REMINDER: Cure under nail LED/UV lamp. CURE TIME: Average for LED lamp 30-60 secs, UV lamp 2-4min.
Brand : Gellen
MPN(PartNumber) : GPW10018-6US_FBA
EAN : 6931685246923