Size · texture quality It is good.

Paste to Macbook Pro 2017 13inch was done. Practice film, production film. Each pasting tool was included. As for the tool, it was better to discard after checking the contents carefully so as not to accidentally discard it as it was affixed with tape inside the body package. Film is a slightly thinner film than other companies' personal feeling (personal feeling) When repeating sticking by sticking with dust etc., you need to work while paying attention to breaking and border floating. Initially it was pasted in accordance with the upper left edge of the screen, but the size is perfect (slightly smaller) so it will not be a good position quite well ... eventually paste based on the camera's camera hole and camera position Did. If the camera comes to the center against the hole, the position of the whole film will match. Since the cellophane tape was used to dust removal, it was driven out by tape little by little. Although there are considerable reflections on the screen, it is clear that it is clearly better than the products of other companies who are not concerned about it and personally singing blue light cut. The quality of the product is much better when compared with the film which has been used up to now.

COSPA is good.

I bought it for MacBook PRO 13 late 2016. Because it is a thin notebook, the liquid crystal panel and the keyboard come into contact with each other when closed, and it is easy for keyboard marks such as dirt to be attached to the screen. It is easy to clean with scratches and easy cleaning. Although it is "antiglare type" whose surface is descending in frosted glass shape, it is inevitable that characters are blurred or black floats white. In this respect, this product has a smooth surface, there is no change in color bleeding and color. Reflections such as indoor lighting are not bothersome. Although I have pasted five liquid crystal protective films of PC so far, including being asked by myself and a friend, I was embarrassed to paste this product. The distinction between the back protective film (the one in contact with the liquid crystal) and the surface protective film (on the keyboard side) is hard to understand, I confirmed it over and over. It is ahead to peel off the small sticky note printed as "STEP 1". In this state, stick it to the liquid crystal, and when the position etc. is decided, peel off the protective film indicated as "STEP 2". Although it comes with a bonus for practice and a stated film, it was not used.

Good liquid crystal film

MacBook pro2017 model I am using it with 13 inches. Although it can prevent dirt while maintaining the beauty of the screen with the glare specifications, those who are concerned about reflections of their own face etc. should purchase the anti glare specification. There are also inferior film which adsorption is sweet and four corners float, but at present it is not such a thing satisfied. Although it is a way of pasting, since a protective film is attached on the film, paste cellophane tape on the four corners from above. When turning the cellophane tape, the protective film and the liquid crystal film beneath it can also be turned over, so we will remove the dust with a tape by hand. After removing the dust, flush bubbles with creca or the like. At this time, when pushing from the top of the protective film, the liquid crystal film will not be scratched. As you scratch the liquid crystal film it will scratch immediately, so please be careful.

Pastefully paste patiently so you can reposition!

Positioning is more perfect than the top, slightly spaced apart, since the alignment seal has a strong adhesive force, peel off the film of STEP 1 and paste it, remove all bubbles at this stage, bubble There are small garbage in the part where it is left, it can be repositioned many times with the sticker for removing dust, but when you strike the seal careful not to distort the film carefully, if you do it persistently and carefully, Bubbles can be stuck neatly without leaving any bubbles. Finally, peel off the film of STEP 2 and complete it. Film is thin, I think that it is good after the keyboard and it is good. Shop support was also polite and good.

A little care needs to be taken

This product is the same as general one and it has 3 layer structure. At the top is a protective sheet (peel off at the end), the middle layer is the main body, lower layer is peeled first. I think that the training sheet and the positioning stickers etc. are included and it is kind. However, a little care is required for installation. It is my experience. A little bubble entered and tried to remove bubbles by peeling off once to remove it. However, the protective sheet will not come off. In the state where the protective sheet was peeled off it could not be successfully stuck. I got a new seat by warranty, and I was able to paste it for the second time without any problems with my first failure.

Impressed by service

Those sent first did not stick well and threw them away. An email came from the seller after writing the review. I was asked in detail why it was not pasted. So, I sent a new one for free. I was moved by this correspondence first! The next day the product came. It was successfully pasted. It is a trusted seller.

I got it successfully

I could not wait for the arrival of the film, because I started using it before putting it on, it got dusty, it was big and I had a hard time as it was, but almost no dust left, so I managed to put it well. However, I used something like a spatula of heavy paper that I attached to other films and stick to it. Other than that, I basically worked according to the written procedure. It has been almost a month, but I am satisfied with my present time.