The E12 is a trapezoidal, two-way loudspeaker using a 12-inch die cast aluminum woofer with a 3-inch voice-coil. The 15mm, 11-ply enclosure provides enough volume to deliver solid low-frequency extension down to 65 Hz making it an excellent choice for applications in which space or budget preclude the use of a subwoofer. The DMT coverage angle of 85° is ideal for most medium and medium-long throw applications.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
FEATURES
- High output, professional quality sound with 400 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
SPECIFICATIONS
|
Model |
E12 |
|
Configuration |
1 x 12-inch, 2-way, non-powered |
|
Frequency Response (-6 dB) |
64Hz – 20kHz |
|
Frequency Range1 (-10 dB) |
46Hz – 20kHz |
|
Power capacity²: continuous/peak |
400 W / 1600 W |
|
Sensitivity |
96 dB, 1 W @ 1 m |
|
Coverage Angle |
85° conical DMT |
|
Output1 (peak SPL @ 1m) |
128 dB |
|
Drivers LF HF |
305 mm (12-inch) driver with 76 mm (3-inch) voice coil 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver |
|
Nominal Impedance |
8Ω |
|
Cross-over |
Full range only, 1.8 kHz |
|
Input Connections |
2 x NL4, 1 x barrier strip |
|
Enclosure |
Trapezoidal, plywood, black texture paint finish. Two side-mounted handles. Perforated, powder-coated steel grille with foam lining. |
|
Mounting and suspension |
6 x M8 suspension points, dual angle, 35 mm pole-socket |
|
Net Weight |
23 kg / 51 lbs |
|
Shipping Weight |
26 kg / 57.5 lbs |
|
Dimensions |
360 x 616 x 371 mm 14.2 x 24.2 x 14.6 in |