Clip On Microphone Suitable for Voice Chatting Program like Skype and QQ on Desktop and Laptop



Top 3 Reasons For Buying







Overview of Mic

This small clip on microphone can be used on computer like desktop and laptop. It is simple to use and no driver is needed. All you have to do to use this microphone is to plug it into the computer and it will start to work immediately. The microphone also comes with a clip so that you can clip it to your shirt when you are using it. This microphone is ideal for those who are using voice chat program like skype and QQ for voice chat. Highly recommended for those who are looking for a cheap and workable microphone.



Pictures



Features
  • Clip on Microphone
  • Frequency Range : 30Hz - 15KHz
  • Impedance : 2.2K Ohm
  • Sensitivity : ~52dB
  • Connector : 3.5mm Plug
  • Length of Cable : 1.5m
  • Headset Microphone
  • Frequency Range : 30Hz - 15KHz
  • Impedance : 2.2K Ohm
  • Sensitivity : ~52dB
  • Connector : 3.5mm Plug
  • Length of Cable : 1m
  • K Microphone
  • Frequency Range : 20Hz - 20kHz
  • Impedance : >10k Ohm
  • Sensitivity : -58dB
  • Connector : 3.5mm Plug
  • Length of Cable : 1.5m



Port Required

The microphone will only work if the port is mic port. Below is an example of the microphone port. This port is normally present in all desktop and most laptop.


Please note that the microphone will not work with a combo port. An additional audio adapter will be required for this combo port. Below is an example of the combo port and audio adapter. This kind of port is normally present in laptop which are smaller and most smartphone.



TroubleShooting

If you want to test for the microphone input after receiving the microphone, you can follow the step below.

Go to control panel>hardware and sound


Under Sound, go to manage audio devices and you will get to the screen below. After that, try to speak to the mic to see if there is any response.


You can also go to the properties to listen to your microphone. Remember to tick listen to this device and click apply as shown in the picture below. In this case, you will be able to hear the sound that your microphone is picking up