1pcs 4-20mA Current Signal Generator 0-10V Voltage Generator Transducer Simulator

 

Features: 

 32-bit ARM-M3 microcontroller as the core of high-performance processors 

 The 1602 display is backlight， standard interfaces LCD1602 

 Active current 0 ~ 22mA output， resolution 0.01mA， 

 Passive current 0 ~ 22mA output， resolution 0.01mA， 

 Output voltage 0-12V， resolution 0.01V， the load current is 24mA 

 Input voltage anti-polarity protection， output over-current protection. 



Applications: 

 signal generator; 

 meter calibration 



Interface :

CN2 Power Interface DC15V 

CN5 Output signals

IN: passive current input 

OUT: Output voltage and current 

COM: output common terminal 


How to use:

 OPEN: 

Click OPEN，the top right corner of the display shows "ON"， output opens， 

Click OPEN again， the top right corner of the display shows "OFF" output off. 

Note: In the output voltage mode， the maximum output current of 24mA， more than overcurrent protection. 


 FUNC: 

The display shows "OFF"， the output is not open， press FUNC switch the output mode 

1)， active current setting (the default is 4mA) 

2)， the voltage setting (the default is 0V) 

3)， passive current setting. (Initial value of 4mA) 


The display shows "ON"， press FUNC for shift operations were 

(+0.01， +0.10， +1.00， +10.00) Display increments 

 DOWN: from minus key. 

 UP: self plus key.

Package included :

• 1 x 4-20mA Current Signal Generator 0-10V Voltage Generator Transducer Simulator

 

';