Product Description

With the project s - inspired by the Nanoxia project, which we developed for the COM put EX 2015 - we present our first full-fledged HTPC case - with a special twist. The absolute highlight of the project s is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance of the system - even if the hardware is fully installed, and during operation. The top is made out of tempered glass, which still allows an unobstructed view on the installed hardware. Since the tempered glass is scratch-resistant, a monitor can be placed on the top, if desired. The I/O-Panel can be found in the right corner of the front panel, which includes 2 x 3.0 USB and 1 x 3.1 Type C USB, as well as the mandatory audio jacks. The power, reset and the LED on/off switch are located above of the usb-ports. The Noble and intentionally simple front design is highlighted again by an RGB LED strip, which decorates the lower part of the front. It is possible to choose between the different colors with a simple push on the LED switch on the I/O-Panel. It is also possible to disable the LED at any time. The project s can be efficiently equipped with radiators or compact water cooling solutions. Not only behind the front panel, but also on both sides. A 240 or 280 mm radiator or compact water cooling solution can be mounted behind the front. The right side panel takes in turn a 120 or 240 mm radiator, and the left side allows the installation of a 120 mm radiator. Graphic cards with a length of up to 400 mm and space for CPU coolers with a maximum height of 170 mm can be accommodated in the project s. Please note: if you want to install fans or a radiator on the left side, the 3-5” HDD holder has to be removed.

Feature

Sophisticated drawer design can be easily pulled out for Installation or maintenance of the system - even if system is fully installed, and during operation.
The top is made out of tempered glass, which allows unobstructed view on the installed hardware; the tempered glass I scratch resistant, allowing a monitor to be placed on top if desired.
Other practical Features include: magnetic dust filters, fully modular HDD brackets, fully adjustable RGB LED strip, 1 x USB 3.1 Type C connector.
Fits up to 8 case fans, 400 mm graphic cards, 170 mm CPU coolers, 240 or 280 mm radiators. Can be used horizontally (HTPC) or vertically (Mid tower).
Includes: one fully adjustable RGB LED strip preinstalled in the front, one 120 mm CoolForce fan preinstalled in the back.
Brand : Nanoxia
Item model num : NXPSB
MPN(PartNumber) : NXPSB
EAN : 4260285294211
Product Dimensions(LxWxH) : 26x46x49cm ; 15309 g
Package Dimensions(LxWxH) : 61x58x36cm ; 15309 g

Attention for order international goodsAll items are delivered from oversea(USA,KOREA,JAPAN,Malaysia)DirectlyDelivery would be done local shipping company in country of Production Place and Qxpress or POST in singaporeTotal shipping takes 7~14 working daysThe item from the third country could take 2 week more than normal delivery in transitNo exchange or Return is Allowed because of simple mind change Such Return or exchange is ly allowed for the reason below Major defect is discovered Wrong item is Delivered If you want to retunr or exchage at you cost, kindly Contact us via email Please check when you return the item just for changing your mind, you could be charge return cost (orginal + return shipping , duty, and etc) You should let us know within 7 days from the date you received the item if you'd like to get a refund for the item About Votage of electronics The voltage of most electronics goods listed on our shop is 110V Need transfomer to use US electronics We cannot accept return for dameged electronic item because of not using transfomer