Further Price Reduction!!!

ALL COLOURS at $4.50!!

All with FREE SHIPPING!!

Stocks in Singapore!

What is Bitatto?

Bitatto is a plastic lid that you can stick onto the openings of wet wipes, such as baby wipes.

Attachment is easy and is a gadget which can be used to keep baby wipes moist to the last one!

Bitatto's characteristics

“The seal won’t stick!” “The last napkin is already dry!” Bitatto was borned from these voices.
Bitatto is a plastic lid which can be easily be attached and removed.
Just stick the special adhesive sheet to the opening of baby wipes package and it helps to keep the napkins left in the pack moist and usable.
When you have used all the baby wipes in the pack, remove the Bitatto and stick it onto the next one.
You can use it repeatedly, hence, it’s economical!
There’s no other product like Bitatto. Make you free from the everyday little stresses.

Bitatto's Dimensions

Bitatto’s Dimensions:

Full length x Full width: 12.0cm x 8.2cm

Lid (that can be lifted): 10.8cm x 7.0cm

Hole in the centre for wipes to come out: 8.5cm x 5.0cm

Bitatto's colours

Bitatto comes in the following 6 colours: White, Light Blue, Pink, Muscat, Strawberry, Chocolate.

Mix and match the Bitatto with your baby wipe package colour!

How to use Bitatto?

1. Remove the original seal closure from the baby wipe package.
※Be careful not to rip the package.

2. Remove the white sheet on the back of Bitatto.
※Be careful not to take off the adhesive sheet.

3. Place the adhesive side of Bitatto onto the opening of the baby wipe package.
※Be careful not to make wrinkles as it weakens the adhesive strength. If there is a wrinkle, please put it again.

4. When the current pack of baby wipes has been used up, the Bitatto can be removed and used onto a new pack of baby wipes.  Make sure that the Bitatto lid is closed before removing it from the package.  Repeat from Step 1 to use Bitatto on another new baby wipe package. 

※When Bitatto is pulled with an opened lid, there might be damage. Remove the Bitatto gently and if it is pulled with too much strength, the adhesive sheet might be torn.

When Bitatto's adhesive strength weakens

Bitatto’s adhesive sheet is weakened by dust and dirt. When the adhesive strength is weakened, clean the adhesive surface with water and let it dry naturally. If the adhesive sheet is weakened by oils such as dirt from the hands or the ink, wipe it gently with neutral detergent or alcohol sanitizer.

Bitatto’s special adhesive sheet is washable with water.

1.  Wash the adhesive sheet gently with water.
If you feel that the adhesive sheet is weak, wash it gently with water using your finger. Do not scrub it with your nails.

2.  Let it dry naturally, than the adhesive strength revives!
Bitatto is reusable and economical.