Shizen Bidet Set Micro
- Water Supply - Direct Connection to the water Mains
- Cleansing Nozzle - Horizontal Sliding Single Nozzle with Cover
- Material -ABS, PP, PE, Silicone
- Size -Nozzle: L115 x W80 x H60(mm) , Controller: L72 x W65 x H55(mm)
- Length of the hose - 50mm controller ~ nozzle,100mm water pipe ~ controller
- Weight -500g(Original box with all parts)
- Installation -Fits all 2-piece toilets and most1-piece toilets
- What's in the box - All parts
-
- Suction Cup(plastic type) - 2pcs for Nozzle Unit, 1pc for Controller
- T-adaptors - ½”(inch) T-valve adaptor(1pc)
- All-in-one Suction Cup and double-sided tape
NOTE & Caution
- This Smart Bidet is for ColdWater Only.
- Using the provided 3M Double sided adhesive is strongly advised.
- Check pipe size in your toilet before installation. The provided unit is for the Singapore Standard 4/8 inch pipes. Non-standard pipes will require an adapter.
- Fullyß (Completely!!) insert the hose into the connectorand fasten the fitting nut tightly using the nut tightening tool.
- When you assemble the adaptor and the inlet valve connection end of water supply at the bottom of the cistern, please be careful not to rotate the float arm screw.
Advisory for 3M adhesive installations
- Clean the surface and dry.
- Ensure no oil or dirt deposits before installation.
- Attach the double-sided adhesive onto the suction cup.
- Attach suction cup with double sided adhesive to FLAT surface of the cistern.
Shizen Bidet Set A
Shizen
Inventory List
- Non electric Shizen Bidet with customizable jet direction & Nuzzle self flush
- 3-way T-adapter(G 1/2") (Singapore Standard Valve)
- Additional T-adapter for Non standard valve
- 1 Meter PU Hose
- Bolts & Nuts Attached
NOTE!
