OBD2 plug to connect with OBD2 sockets on your car
Requires wireless network and wireless router for operation
OBD2 functions can take ELM327 RS232/USB/Bluetooth protocol as a reference
Connect this cable to your iPhone, iPod, iPad or computer to see the reason of car failures
Supported PC Software: Dashcommand, ScanXL, ScanMaster-ELM v2.1
iPhone, iPod, iPad Software: FuzzyCar, FuzzCodes, LogWorks, DevToaster 2.0.2
SSID: CLKDevices
IP: 192.168.0.10
Subnet: 255.255.255.0
Transport Ports: 35000
Range: 50 m (indoor), 500 m (outdoor)
Built-in antenna
Power Consumption: 0.85W
Wireless Standards: 802.11 a, 802.11 b, 802.11 g
Operation Instructions:
For Apple Products:
Connect with iPhone, iPod, iPad and open Wi-Fi page, then choose CLKDevices
Set the IP address to fixed address such as: 192.168.0.12, 192.168.0.20
Set the subnet to 255.255.255.0 and the transport port as 35000
For Computers:
Open the Wi-Fi internet connection and change the IP address to a fixed one, such as: 192.168.0.12
Change the subnet to 255.255.255.0
Double click the CLKDevices at the lower right for connection