Item Descriptions:

Color:

1 revolution / 120 minutes

It becomes a set product of a rotary head that can perform time lapse shooting while rotating 360 ° with a smartphone, digital camera, Gopro, action camera, etc, a free head with angle adjustment width, a smart holder.

Slow rotation starts when the rotary head is not required for batteries, twisted according to the angle you want to shoot and turned.

When the memory reaches End, the timer (bell) will stop for 3 seconds and the reverberation will stop.

There is no speed adjustment function.

The rotation speed is one revolution (360 ° / 60 minutes, 180 ° / 30 minutes, 90 ° / 15 minutes, 30 ° / 5 minutes) in 60 minutes.

Memory is in 5-minute increments.

There is a 1/4 inch screw hole on the bottom of the turntable so you can shoot it by attaching it to a panhead such as a tripod (tripod).

If you use the attached free platform, you can adjust the angle relatively freely.

【Product contents】

· 360 ° rotation head platform × 1

· Free platform Ũ 1

· Clip type smartphone holder × 1

【please note】

- When using the free head, please adjust the angle within a reasonable range.

· When installing, please install in consideration of the angle of the grounding point, the weight of the equipment and the center of gravity.

· Please note that unstable installation leads to equipment breakage due to falls and dropouts.

※ The rotary base is a power spring drive.

Please be aware that excessive rotation, stationary, reverse rotation will cause malfunction.

※ Image smartphone, digital camera, Gopro, and Gopro adapters are not included

※ Since the usage method is extremely easy, manuals are not included in this product.

Please refer to this page description and product introduction image.

※ The warranty covers only initial failures.

Features:

• Please enter model number Confirm this is compatible:
• It will be a set product of time lapse rotary head, Maho holder, free head
• 【360 ° rotation head】 Diameter: 6 cm / height: 4 cm, mounting screw: 1/4 inch, bottom screw hole: 1/4 inch, weight: 155 g, material: aluminum alloy, memory: 15 min increments
• , Rotation; counterclockwise (rotate 360 ° in 120 minutes), drive system; spring
• [Free platform] length: 6 cm, weight: 35 g, mounting screw: 1/4 inch, bottom screw hole: 1/4 inch
• 【Smartphone holder】 A clip type, a smartphone with a width of 55 to 85 mm is caught (iPhone 6 6 plus 5 s 5 Samsung Galaxy S6 S5 S4 S3 Note 4 Note 3 etc. possible), weighs about 25 g, screw hole φ: 1/4 inch
• (It can be used properly according to the angle of your choice which is in two places on the side and the back)
• ※ Dhana Style is a registered trademark

Product information:

Shipping Weight: 240 g

Package Dimensions: 6.60 x 7.39 x 8.41 cm