Item Descriptions:

Dialable smartphone motorcycle holder

【Product Features】

♪ This product is a holder for fixing the iPhone · smartphone · navi · GPS etc. to the handlebars of bicycles · motorcycles.

Navigation · Music fun with tooling spreading.

♪ You grab the four points of the smartphone tightly, you will not be blurred even while you are driving, there is no worry of falling.

♪ By adjusting the thickness with the attached thickness adjustment pad (1 mm, 2 mm, 3 mm total of 3 attached), you can feel a more solid hold feeling.

♪ The inner side of the four corners of the nail portion is a rubber specification with a thickness of 1.5 mm with cushioning properties.

Suppresses rattling and prevents damage to the smartphone.

It corresponds to various models!

!

♪ We are providing wide fixation for various sizes due to wide installation possible!

♪ It corresponds to 3.7 inches ~ 7 inches.

(Note: thickness less than 12 mm)

♪ This one can handle various models from ipohne to Android each model.

♪ Thickness adjustment pads of three different thicknesses, not only the size but also the thickness is just fit.

【Connection to Handle】

♪ It can be attached to a handle of about 22 to 35 mm in diameter.

Rubber for thickness adjustment adjusts the thickness and absorbs vibration.

♪ The connection to the handle can be selected as follows.

① Fix with hand using mounting screw

② Fix with hex bolt (with hexagonal wrench and bolt)

(Original specification only for YuHaru) Picture right

♪ Mount screw can be easily removed by hand, so please connect with hexagon bolt if you are worried about theft.

♪ When connecting with hexagon bolt, the appearance is also cleaner so we recommend connecting with hexagon bolt for those who are always in place.

【set content】

· Main body × 1

※ smartphone is not included

Thickness adjustment pad × 3 (1 m, 2 mm, 3 mm)

· Hexagonal wrench × 1

· Hexagon bolt × 1

【Notes】

※ Please do not install this product in places that would interfere with driving, in places that would hinder visibility.

* Do not operate the equipment attached to this product during operation.

Please make sure to stop after you stop.

* When using for a long time, please check each part for looseness, etc. If looseness is occurring, please use after tightening.

Features:

• Secure the smartphone to the handlebar of the bicycle motorcycle.
• There are no worries about falling because it fixes the smartphone with four arms.
• By expansion and contraction of 4 arms, it corresponds to models of various sizes from iphone 4 to iphone 7, various Android.
• With the included thickness adjustment pad, you can fit the smartphone perfectly into the holder and will not rattle even with intense vibration.
• Corresponds to the handlebar with a diameter of about 22 to 35 mm.
• It is possible to adjust according to the thickness of the handle you use with the attached belt rubber.
• Since the main body and the clamp are ball joints, angle adjustment is possible freely 360 degrees.
• You can adjust immediately when you want to change the direction of landscape or landscape or when angle adjustment is necessary due to reflection of the sun or the like.
• In response to the customer's voice that "It is easy to remove because it is easy to remove," we also included a hexagon bolt (hex wrench included) that requires a hex wrench for removal (YuHaru original specification).
• We also bundle mount screws removable by conventional hands, so please use it according to the application.

Product information:

Shipping Weight: 140 g

Package Dimensions: 5.41 x 7.19 x 15.19 cm