Step 1 - Back Cover

Remove the battery and memory card from the device.

Step 2

Remove 4 screws from the right side of the camera.
There are two 3.4mm screws at the top.
There are two 2.2mm screws.

Step 3

Remove the single 3.4mm screw on the left side of the camera.

Step 4

Remove 5 screws from the base of the camera.
There are two 2.2mm screws next to the battery compartment.
There are three 4mm.

Step 5

Slowly slide the back cover away from the device.
The back casing is held in place by two ribbon cables. Do not pull the back cover too far from the camera.

Step 6

Detach both ribbon cables using a spudger.
Use the tip of the spudger to lift the black clip upward, unlocking the ribbon cable.

Step 7

Remove the back casing from the camera.

Step 8 - LCD

Use a spudger to release the 3 clips between the LCD case and housing.
Put the tip of the spudger in the gap between the clip and housing, then lift up gently to unclip.
Gently lift the LCD from the case, making sure none of the 3 clips reattach.

DescriptionThis is a high quality LCD Screen Display for Canon SX110. It is used to replace faulty screen, this will also can replace screens which have display problems, cracked LCD screens and so on. It is the best replacement for your damaged screen.

FEATURES

LCD Screen to replace / fix your dim or broken camera
Be made from high quality and durable materials
Without backlight
Size: 3 inches

Package Includes

1 x LCD Screen Display for Canon SX110