Item Descriptions:

color:

5050 Non-waterproof

feature

• Adopt SMD 5050-30 for heat dissipation and durability.

Dustproof, low power consumption and long life.

It is not a drip - proof structure.

• Depending on requirements, you can cut each LED along the cut mark for each of the three LEDs.

• It turns off when cutting at a position other than the specified position.

• Tape design may change due to Rosito.

• Sticky adhesive paste with double-sided tape and paste it wherever you like.

• It is good as a wonderful decorative light for home, sign lighting, commodity display fixture lighting, under shelves, car lighting, indirect lighting, bars, clubs, indoor amusement parks and theaters.

• An RGB remote control is included and you can change the color you want with the remote control.

Product specification

• Width: 10 mm

• Thickness: 2 mm

• Length: 5 m

• Passed PSE, CCC, CE & RoHS standard

44 key control board

• Input voltage: 12 V DC

• MAX output current: 6 A

• MAX output power: 72 W

• Control mode: IR

• Dimming mode: PWM

• Output: 12 V DC

• Operating temperature: -20 to 60 degrees

• Control distance: 5 m (there are no obstacles)

• Item Color: White

• Material: Plastic

• Dimensions: 12.5 x 5.5 x 0.7 cm

Power supply

• Output: 12V

• Input: 100-240 VAC, 50/60 Hz, 1.5 A

• Power consumption: 72 W

DC port: 5.5 x 2.5 mm

• Dimensions: 14 x 5 x 3 cm

Items included in the package

• 1 x 5 M LED Strip Light

• 1 x signal receiver

• 1 x 44 Key Control Board (Includes Battery)

• 1 x power supply

please note

• Align the arrows.

• It turns off when cutting at a position other than the specified position.

• Clean, degrease and paste the mounting surface.

• If the power supply or controller does not work, please contact us at any time.

Please ensure the accuracy of the connection before use.

If the product can not be used correctly, the power supply unit may burn.

Features:

• This is a standard kit.
• The adapter is a PSE standard and can only load 5 meters.
• Do not add strip lights.
• RGB LED strip, remote control, PSE compatible AC adapter and connector are attached.
• No more accessories are necessary.
• Do not leave it on the spool when testing for more than 2 minutes.
• It tends to lead to overheating.
• It is necessary to ensure ventilation.
• These lights require excessive airflow for cooling.
• 44 There is a DIY function on the key controller, you can set it by pressing and holding the arrow button after pressing the "DIY" button.
• There is also dimming and brightness control.
• Cuttable and linkable.
• Color changing LED strip light can be cut every 3 led, its adhesive tape backing can fit many dry flat surfaces.
• It allows you to change the color through the controller.
• It has many options, White / Red / Green / Blue / Yellow.
• Very suitable for indoor lighting and interior.
• Kitchen, cabinet, dining room, bedroom, garden, patio, balcony, party, wedding, etc.
• Remarks: Complete 12 month warranty, 30 day money back guarantee is attached.
• If the power adapter and other accessories do not work, please contact us.
• Connect the load and power lines and check all connections before turning on the power.
• Make sure there is no obstacle between IR controller and receiver during operation.
• Please remove the plastic sheet of the battery of remote control before using.

Product information:

Shipping Weight: 471 g

Package Dimensions: 4.90 x 19.30 x 19.51 cm