Instructions for use:
1. First of all, your right hand on the "polygraph" finger slot, be sure to direct contact with the fingers of the above sensors, hand tied with the hand.
2. Press the Reset button to keep the finger moving, press the "Analyser" button, the machine will begin to read some of your data in order to start the test when the comparison.
The polygraph indicator will also start and you will hear the sound of the "data read complete". At this point, your data has been entered into the polygraph inside, waiting to start asking questions.
3. The person who is now polygraph can ask the tester, remember that you will click the "Analyser" button after each question. The polygraph will measure whether you have to lie, and the level of lying. If you lie, there will be an LED indicator to show you the degree of lying. There are five levels of indicator light, three green, two red. They will be followed by the test and light up, the more light the lights, it means that the greater you lie. If you lie directly or give an unacceptable answer, or distort the facts, all the lights will light up, then you will be punished by being shocked.
In general, people responded after being shocked to raise their hands immediately. This polygraph can be moved and can move with your hand. So that it is easy for others to play. If you want to start over, or re-test another person, you need to press the Reset button to clear the data inside, and then repeat the 1-3 above description.
Note: The polygraph will automatically analyze the data and store the information after each question. The more questions you ask, the more data you need to analyze. So, at first you may have to escape because of the lack of data, but with the question too many, you are increasingly likely to be detected to lie, and thus by the electric shock.
Each person's data will be different, so the polygraph may be different due to personal differences.
This is just a game for entertainment
