Item Descriptions:

Product introduction

Industry's Smallest Class Compact Dial + Easy Water Temperature Control of New Standard Heater New! Water Temperature Setting Type Auto Heater Appears !! ■ Micro Dial · Compact Control Dial of Industry's Smallest Class.

· Control range 23 ° C ~ 32 ° C · With energizing lamp.

High performance IC control.

● Heater capacity: 200W ● Approximate water tank standard: 60 ~ 75cm or less ● Estimated water capacity: Approximately 100 liters

Usage notes

When disconnecting the power plug of this product, hold the power plug and do not have the power cord and pull it out.

If this product should be damaged in the water, be sure to unplug the power plug before removing it.

If breeding a sharp tooth such as piranha, please protect the power cord from being scratched.

When dropping the control dial part into a water tank with water, immediately disconnect the power plug from the outlet and stop using it.

Also, please do not use it absolutely because it can not operate normally even if it is dry.

When using, please select a heater suitable for water capacity.

It can not be used if it can not be set as shown in the "Installation method" of this product's instruction manual.

Do not submerge this product (heater) in the air in the air, in the heated state, absolutely.

The cord of this product, rubber cap, kiss rubber is dangerous as deterioration progresses in water, it becomes hard and causes cracking.

We recommend that you replace the heater as a rough standard.

This product has no function to lower the water temperature.

Even in a short period of time before the safety circuit works, do not reuse it because the surface processing of the heater section will be damaged if the sky runs out.

Do not use this product in vessels other than ornamental fish tanks (filtration tank, bucket, costume case, etc.).

When using this product in a tank other than a glass tank (such as plastic or acrylic), please install so that the heater section does not touch the tank directly.

Please do not use in shallow water tank.

When setting this product, be sure to set it horizontally.

Be sure to fix the heater part and sensor part with the attached kiss rubber at the position where it is not exposed to the water surface even if the water decreases during use.

Please do not drop or put ornaments and rocks for aquarium on the heater part and the sansa part.

Also, please be careful not to hit when setting.

Do not use near flammable materials (thinner, gasoline, benzine etc.).

Do not use in places exposed to direct sunlight, vibration, dust etc.

Please do not install in the state where heater part and sensor part are buried in gravel or covered with heater cover.

Do not apply hot water to this product or soak it.

When an ozone generator or a sterilizing lamp is used, it will cause the rubber and resin parts to deteriorate markedly and cause malfunction.

Always circulate the water in the aquarium using an air pump or a filter.

Be sure to check with the water temperature gauge (optional) whether the water temperature is appropriate once a day.

Also, please note some temperature error due to the type of water temperature gauge, battery exhaustion of the digital water temperature gauge, or misdisplay due to malfunction.

Do not use in aquarium containing chemicals other than polluted abnormal water quality water and ornamental fish chemicals not suitable for aquarium breeding.

In use with strongly alkaline, strongly acidic water quality, all parts may deteriorate markedly and cause malfunction.

In addition, please be sure to read the instruction manual of this product and use it safely.

Show all product descriptions

Features:

• Body size (width X depth X height): 9 × 5.5 × 33.5 cm
• Body weight: 360 g
• Country of Origin: People's Republic of China

Product information:

Shipping Weight: 362 g

Package Dimensions: 5.79 x 9.19 x 33.70 cm