BM100 Digital 2.5\'\' LCD Intelligent Battery Charger Multifunction for 4 AA AAA Rechargeable Batteries AKKU， Free Shipping
Note: The Difference between BM110 and BM100 is on LCD display， The function is the same
OPERATING INSTRUCTIONS
Intended Use
The product is intended to charge and discharge NiCd or NiMH rechargeable batteries. It provides four independent charging
slots for AA/AAA rechargeable batteries. The charger can also optimize and test the maximum capacity of the rechargeable
batteries. Each charging slot has its own display to show various information， such as， charging current， battery voltage， charged
capacity and used charging time.
The charging current can be selected from 200，500，700 and 1000mA. If two or less batteries are inserted in slot 1 and/or 4，
the charging current can go up to 1500mA or 1800mA.
The charger can charge batteries of different type and size and with different capacity at the same time. It also integrates the minus
delta voltage (ΔV) function， which monitors the voltage over the charging cycle. When battery is fully charged， the charger will switch
to trickle charging automatically. Therefore the battery will be kept at its optimum capacity. The charger also includes overheat detection
to protect rechargeable batteries and charger itself from overheating.
The charger can only be powered by the specially designed power supply. Operate and store it in dry indoor environment only.
CE Certificate is available upon request.
Technical Data
Matterial: ABS plastic
2.5’’LCD Display
Operating Voltage: 3V DC
Power Adapter
Input:100~240V~， 50/60Hz
Output: 3.0V DC， 4.0A
Charging Current range: 200 ~ 1800 mA
Discharging Current range: 100 ~ 500 mA
Max. Charging Capacity: 3500mAh
Suitable for 4 x AA or 4 x AAA batteries
Operating Temperature: 0°C to 40 °C
Operation Modes:
--Charge Mode: The rechargeable battery is charged up to its maximum capacity.
--Discharge Mode: It is used to reduce the memory effect. The rechargeable battery is discharged to a preset battery voltage (0.9v).
Once discharge is finished， the battery will be charged at the preselected charging current. Discharge current is always
half of the selected charge current.
--Refresh Mode: The rechargeable battery is charged and discharged repeatedly to optimize to its maximum capacity. Old rechargeable
batteries or rechargeable batteries that have not been used for a long period of time can be restored to their rated capacity. Depends
on the selected charge current， it can take tens hours or even days time before complete.
--Test mode: Checks the present capacity of a rechargeable battery. The maximum capacity is determined by discharging the rechargeable
battery after it was fully charged. If the maximum capacity is much lower than the rated capacity then it may reach the end of its lifetime.
Package include:
1* Battery Charger BM100
1* Power Adapter (EU or US Plug)
1* Operation Instructions
';