Please test the screen first after you received the item,12 months quality for non-human factors,If is not good ,please contact us for change ,Repair/Replacing old,damaged, cracked, shattered screen,Instructions are NOT provided.
Please power off to keep you safe when you install the screen,Product compatible with iPhone 4S ONLY,please never try to use for iPhone 4GSM/4CDMA .
Including camera ring,receiver net,but Camera is NOT included.Quality of Frame is very good,Offer high sensitivity and durable performance .
Be careful when installing and bending the cables.
Make sure you have read through the installation instruction printed on manual in the package,if you are not confident about that, we suggest you to locate a repair shop at your neighbourhood,cover up any metal bare connections around the flex cable with kapton tape to avoid any ''short-out'',make sure you power off your phone before starting the repair work,check whether there is any dust or debris in between the flex cables and motherboard. clear them with brush or alcohol dipped cloth,don''t bend the flex cables, make sure the flex cable is properly connected with a ''click'' sound.don''t force the connector together until they are properly lined up.

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 4 inch
Height : 0.05 inch
Length : 7.3 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0.16 ounce (View shipping rates and policies)

ASIN : B01LXWJMWJ

Product Description

Package
1 x LCD screen replacement for iPhone 4s
1 x repair kit
iPhone,Home button and camera are not included.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure for iPhone IOS is upgraded to the latest version.
5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away
after some time. Please leave phone alone overnight and see if this problem persists in the morning.
Note:
The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen, so total four flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported.