15 year
Easy to apply
Repels stains
Indoor and outdoor use on marble, limestone, granite, Saltillo and terra cotta
Once cured, this product is food contact safe

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 5.1 inch
Height : 2.4 inch
Length : 5.8 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B006HB93X6

Product Description

Stain proof original is an impregnating, invisible and breathable sealer that protects exposed natural stone, tiles, pavers, concrete and grout from damage caused by water, salts and oil based stains. Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer. Stain proof originality provides lasting protection for natural stone, concrete, terracotta tile, cast stone, paving, sandstone, limestone, brick and grout. : A 15year performance is offered when product applied by an accredited applicator following our written instructions and surface is maintained regularly using our written maintenance system, as outlined in our document. Spills should still be cleaned up immediately to minimize absorption. Application rates: Total application rate is approximately one liter per two to 25 sq. meters (20 to 250 sq. feet per quart) depending on absorption. How to use: Always test product on a small area first and allow a 24 hour cure time to determine the ease of application and desired results. Ensure surfaces to be treated are dry, clean and free of residues. Product is to be applied without thinning. Generously saturate the surface with product using a low-pressure hand spray, a clean brush or similar. Surface should have a mirror like wet look for 35 seconds. Avoid contact with surrounding areas. When the surface becomes touch dry or a minimum of 10 minutes, repeat step 4. Total application rate is approximately one liter per two to 25 sq. meters (20 to 250 sq. feet per quart) depending on absorption. When the surface becomes touch dry or a minimum of 10 minutes, to allow the product to penetrate into the surface, polish surface with a clean white dry cloth to remove excess product. If you have waited too long and the product has begun to cure and has become more difficult to remove, moistening the cloth with stain proof original should ease polishing.