1) Module parameters:
- Properties: non-isolated step-down constant current? constant voltage module (CC CV) charging module
- Scope: High-power constant current LED driver? battery charger (including ferroelectric)? 4V? 6V? 12V? 14V? 24V battery charging? nickel-cadmium nickel-metal hydride batteries (battery) charger? solar panels? wind turbines
- Input voltage: 7-35V?
- Output voltage: 1.25-30V adjustable
- Output Current: Max3A (more than 15W? please install heat sink? this item do not include HEAT SINK)
- Constant current range :0-3A (adjustable)
- Revolving light current: constant current value * (0.1)?
- Such as the constant current value is 3A? revolving light current is set to constant current of 0.1 times (0.1 * 3A = 0.3A)? when adjusted constant current value to 2A? then revolving light current is constant current of 0.1 times (0.1 * 2A = 0.2A). this version is 0.1 times fixed
2) Feature:
- Dropout voltage: 2V
- Output power: natural cooling 15W? 25W with heat sink
- Conversion efficiency: 90% (up to 90% (the higher the output voltage? the higher the efficiency)
- Output ripple: 20M bandwidth (for reference)
- Input 12V Output 5V 3A 60mV (MAX)
- Operating Temperature: Industrial (-40 ? to +85 ?) (ambient temperature exceeds 40 ?? lower power use? or to enhance heat dissipation)
- Full load temperature rise: 45 ?
- No-load current: Typical 10mA (12V switch 4.2V)
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Constant accuracy and temperature: the actual test? the module temperature changes from 20 ? to 100 ?? less than 1% change constant current value (constant current value 1A)
- Dynamic response speed: 5% 200uS
- Potentiometer adjustment direction: clockwise (increase)? counterclockwise (decrease)?
- Potentiometer close to the input is Voltage regulation (CV)?
- Potentiometer close to the output is current regulate (CC)?
- Indicator: two-color LED charging indicator light red? fully charged light green (do not connect load light green)
- Output short circuit protection: Yes? constant current (constant current setting values)
- Input reverse polarity protection: Yes?
- Output to prevent reflux: Yes? the output has an internal series a diode to prevent reflux.
- Connection: Welding? plus pin can be directly soldered to a PCB
Specification:
| Package Weight | | One Package Weight | 0.04kgs / 0.09lb | | Carton Weight | 10.60kgs / 23.37lb | | Carton Size | 36cm * 32cm * 36cm / 14.17inch * 12.6inch * 14.17inch | |
