3.5 Inch TFT LCD Display + DIY Acrylic Case For Raspberry Pi 2\/B+
Manual and driver: http:\/\/forum.banggood.com\/forum-topic-109744.html
Parameter:
LCD Type TFT LCD Interface SPI Touch Screen Type Resistive Touch Screen Controller XPT2046 Colors 65536 Backlight LED Resolution 320*480 (Pixel) Aspect Ratio 8:5 Power Consumption TBD Backlight Current TBD Operating Temp. (Centigrade) TBD
Interface Definition:
PIN NO. SYMBOL DESCRIPTION 1， 17 3.3V Power positive (3.3V power input) 2， 4 5V Power positive (5V power input) 3， 5， 7， 8， 10， 12， 13， 15， 16 NC NC 6， 9， 14， 20， 25 GND Ground 11 TP_IRQ Touch Panel interrupt， low level while the Touch Panel detects touching 18 LCD_RS Instruction\/Data Register selection 19 LCD_SI \/ TP_SI SPI data input of LCD\/Touch Panel 21 TP_SO SPI data output of Touch Panel 22 RST Reset 23 LCD_SCK \/ TP_SCK SPI clock of LCD\/Touch Panel 24 LCD_CS LCD chip selection， low active 26 TP_CS Touch Panel chip selection， low active
DIY Transparent Acrylic Case For 3.5 Inch TFT Screen Raspberry Pi B+
Description:
Color:TransparentMaterial: Acrylic
Package included:
1 x 3.5 Inch 320 X 480 TFT LCD Display Touch Board
1 x Acrylic Case For 3.5 Inch TFT Screen