Charging:

The built-in rechargeable lithium battery, the first use of the machine, please first charge, you can charge the following way:

1) Connect the computer to charge, use USB to connect with the computer.

2) while recording, you can also charge the video (external USB 5V charger or mobile treasure).

3) charge blue light long bright, full of red and blue light after the long light that full, (red and blue lights, please re-charge about 30 minutes will ensure that the battery 100% full).

Note: 1: When the battery is low, T card is full, DV red and blue light will flash 5 seconds after the direct shutdown into the protection state, (save the file and automatically shut down) the recording file has been saved, To charge.

2: boot without card, red and blue lights at the same time flash 5 seconds automatically shut down.

3: boot without any working mode, 1 minute automatically shut down.

First line with three:

USB with TV cable, 1: can be inserted into the computer to charge the machine and data transmission. 2: You can insert the TV OUT screen display. 3: can be inserted outside the DV 5V side charge record.

720P video does not flash:

Press the ON OFF button for the boot, boot blue light is always on, click on the switch machine 1, blue light flash 3 down to 720P video, video process lights do not prompt, 5 minutes an automatic section to save continuous video, Press the switch button once to stop the video, back to the blue light standby mode.

1080P video does not flash:

Boot blue light long standby mode, press the mode button 1, red and blue light long 1080P video mode, and then click the switch button 1, blue light long red light flash 3 are off, for 1080P video 5 minutes An automatic section to save continuous video, cycle coverage, and then click the switch machine to stop recording, back to standby mode.

Take pictures 12 million:

Power on standby mode, press the mode button 2 times the red light long for the camera mode, and then click the power button a red light flash, take a picture, 12 million pixels (4032X3024) automatically saved.

Infrared light on Off:

On: Power On Standby Any mode, press and hold ON / OFF 2 seconds or so red light flash 2 under the infrared night vision lights open, you can night video.

Off: Turn off the infrared night light, in any standby mode, press and hold ON / OFF 2 seconds or so, the red light flash 3 to turn off the infrared night light.