Model: ATZ HDMI-424E
Description: 4X2 HDMI v1.4 Matrix Switch w/EDID Selector
Introduction:
This is a high performance HDMI Matrix with four HDMI inputs & two outputs, it allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the two displays simultaneously, and supports 4K×2K, 3D, 12-bit Deep Color. With its 3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
Features:
- Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
- 3D HDMI 1.4a video format support.
- 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
- Supports deep color up to 48-bit per pixel.
- HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
- Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR
- Full colorimetry including sYCC601,Adobe RGB,Adobe YCC601,xvYCC extended gamut color
- Operates for TMDS clock frequencies up to 300MHz
- Supports EDID control via EDID Selector.
Package:
- HDMI Matrix ---------------------------------1PCS
- 5V1A DC Power Supply adaptor ------ 1PCS
- Operation Manual --------------------------1PCS
- Remote controller---------------------------1PCS
Specifications:
|
1
|
Frequency Bandwidth
|
2.97Gbps
|
|
2
|
Input Ports
|
4 x HDMI Female input ports
|
|
3
|
Output Ports
|
2 x HDMI Female output ports
|
|
4
|
Power Supply
|
DC 5V 1A
|
|
5
|
ESD Protection Human Body Model
|
± 8kV (air-gap discharge) ± 4kV (contact discharge)
|
|
6
|
Dimensions (mm)
|
85(W) X 192 (D) X 26 (H)
|
|
7
|
Weight(g)
|
450
|
|
8
|
Operating Temperature
|
0°C ~ 40°C / 32°F ~ 104°F
|
|
9
|
Storage Temperature
|
-20°C ~ 60°C / -4°F ~ 140°F
|
|
10
|
Relative Humidity
|
20 ~ 90% RH (Non-condensing)
|
|
11
|
Power Consumption (Max)
|
5W
|
Operation controls and Functions:
Front Panel:
(1) ON/OFF: Power on/off switch.
(2) POWER LED: This red LED illuminate when the device is connected with power supply.
(3) IR IN: Remote control signal receive.
(4) OUTPUT A: Press this button to select input sources to HDMI OUT A，and the LED will indicate the corresponding input source.
(5) OUTPUT B: Press this button to select input sources to HDMI OUT B，and the LED will indicate the corresponding input source.
(6) EDID Selector: Select HDMI output signal format via EDID Selector.
|
Number
|
EDID Selector
|
Description
|
|
1
|
0000
|
1080P,Stereo Audio 2.0
|
|
2
|
0001
|
1080P,Dolby/DTS 5.1
|
|
3
|
0010
|
1080P,HD Audio 7.1
|
|
4
|
0011
|
1080I,Stereo Audio 2.0
|
|
5
|
0100
|
1080I,Dolby/DTS 5.1
|
|
6
|
0101
|
1080I,HD Audio 7.1
|
|
7
|
0110
|
3D,Stereo Audio 2.0
|
|
8
|
0111
|
3D,Dolby/DTS 5.1
|
|
9
|
1000
|
3D,HD Audio 7.1
|
|
10
|
1001
|
4K2K,Stereo Audio 2.0
|
|
11
|
1010
|
4K2K,Dolby/DTS 5.1
|
|
12
|
1011
|
4K2K,HD Audio 7.1
|
|
13
|
1100
|
Reserve
|
|
14
|
1101
|
Reserve
|
|
15
|
1110
|
Reserve
|
|
16
|
1111
|
Auto mode(default)
|
Rear Panel:
(1) HDMI OUTPUT: These slots are where you connect the HDTV or monitor with HDMI cable.
(2) HDMI INPUT: These slots are where you connect the HDMI source output from DVD, PS3.
(3) DC IN: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet.
Application Example:
Remote control:
OUTPUT A: Press IN1IN2IN3IN4 button will fast switch to select input source to HDMI OUTPUT A, and the LED will indicate the corresponding input source. Press button OUTPUT A will cycle from input IN1IN2IN3IN4.
OUTPUT B: Press IN1IN2IN3IN4 button will fast switch to select input source to HDMI OUTPUT B, and the LED will indicate the corresponding input source. Press button OUTPUT B will cycle from input IN1IN2IN3IN4.
