Window Film One Way Mirror Film Privacy Static Non-Adhesive Decorative Heat Control Anti UV Window Tint for Home and Office, 23.6” x 78.7”



35.4 Inch x 164 Feet








35.4 Inch x 78.7 Inch


35.4 Inch x 32.8 Feet

Product Description

Features

1. 15% VLT can effectively reduce glare, widely used in home, office, dining room, kitchen, bedroom, etc.

2. 90% Infrared blocking + 85% Anti-UV, reduce time of using air conditioner, low-carbon and energy conservation, meanwhile protect your interior.

3. No glue, made from environmentally friendly PVC, 0.15mm thick, clean and bright, no hidden trouble.

4. Easy to install, static cling, applicable to any smooth or flat glass surface, like window, sliding door, balcony, protecting your window glass.

5. The self adhesive window privacy film can last long, also can remove as you need. It comes off cleanly without leaving residue.

Install Steps

1. Trim privacy film to required size

2. Keep window or glass clean

3. Wet the window with soapy water

4. Remove the backing protective sheet, and wet the solar film

5. Set up one way glass film on window

6. Cover the backing film on the solar film before squeegee away water and air bubbles

7. Peel off the backing film

8. Cut off the excess edges

Remarks

1. Single plane fluoroscopy: One-way perspective refers to the strong light intensity side can't see the dark side of the light, which means when indoor light is stronger than outdoor, people outside can see people inside. In general, people outside can't see people inside during daytime

2. Reflect light inside: Refers to the glass shine like a mirror when evening indoor light is strong, the outside glass shine like a mirror during daytime

3. Peel off the backing transparent protective film, paste the film to the window and use your hand to press it from the top down so that it can tightly attach to the surface, put protective film on window film before squeegee away water and air bubbles, prevent damaging window film

Package Include

Window film x 1

Installation guide x 1


Feature

HEAT INSULATION AND ENERGY SAVING - Blocking out 90% of infrared rays, the heat control window film can retain heat in winter and keep it out in summer, helping reduce expensive heating and cooling costs. 15% of VLT meaning effectively reduce glare
EFFECTIVE UV REJECTION - UV solvents added at the bottom, the window reflective film effectively blocks out 85% of UV rays, and reduces fading and aging of interior furnishings
STATIC CLING AND NON ADHESIVES: Glue free design, no chemical release, very easy to install, just make sure window surface is completely clean and absolutely free of any blemishes, remember to use A LOT of soap/water mixture to soak both the adhesive side and window
THICK AND HIGH QUALITY - The house window tint is of 0.15mm thick to have excellent thermal insulation effect, with anti-scratch layer on the surface, friction resisting, won't fade nor blister, easy to remove, economical and practical
PRIVACY PROTECTION - The one way window film provides great intended privacy during daytime only; the mirror-effect is reversed at night since the interior will be exposed to more light than the exterior. The side with the most light will have the mirror-like appearance
Brand : WorthSeller
MPN(PartNumber) : SV002
EAN : 0763383103262
Package Dimensions(LxWxH) : 63x5x5cm ; 567 g