INTRODUCTION: HDMI Extender by TCP/IP is based on TCP/IP standard. It extends your display with the resolutions of 1080P/60Hz up to 395feet (120 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard, you can extend you HD video to multiple displays by using an Ethernet router or hub and the total distance can be up to max 660feet. You can add more receivers over LAN to receive same display from the source. Theoretically, you can add over 200 receivers in a LAN network.
FEATURES:
* Following TCP/IP standard
* Supports resolution up to 480P/720P/1080I/1080P
* Supports max video bandwidth to 1.65Gbps/165MHz
* CAT5e/6 cable follows the standard of IEEE-568B * Supports 3D
* Built-in bi-directional IR interface enables you to control the input source from either end of the connection.
* High Quality Chipsets
SPECIFICATIONS:
|
Signal input |
HDMI Signal |
|
Input Video Signal |
0.5-1.0volts/p-p |
|
Output video |
HDMI Signal |
|
CAT-6 cable |
120m for 1080p |
|
Vertical Frequency Range |
50/60Hz |
|
Video Amplifier bandwidth |
Max up to 1.65Gbps/165MHz |
|
Interlaced (50&60Hz) |
480i,576i,1080i |
|
Progressive(50&60Hz) |
480p,576p,720p,1080p |
|
Limited Warranty |
1 Year Parts and Labour |
|
Operating Temperature |
0℃ to +50℃ |
|
Operating Humidity |
10% to 85 % RH (no condensation) |
|
Storage Temperature |
-10℃ to +80℃ |
|
Storage Humidity |
5% to 90 % RH (no condensation) |
|
Power Supply |
5V DC @2A |
|
Power consumption (Max) |
8W |
|
Power Supply Cert |
CE,FCC |
|
AC Power Adapter |
US standard、UK standard and so on |
|
Extender Unit Cert. |
FCC,CE, |
|
User Manual |
English Version |
INSTALLATION REQUIREMENT:
* HDMI Source is with IR Function (Computer Graphics Card, DVD Player, PS3, Blu-ray etc.)
* SDTV, HDTV or Projector are with HDMI Port
* Linking Connector: UTP/STP Cat5/Cat5e/Cat6 cable * Different Cable Length capability listed as follow:
Cat.5 : 80m Max between 2 devices
Cat.5e: 100m Max between 2 devices
Cat.6 : 120m Max between 2 devices
SAFETY INFORMATION:
* Incorrect placement of sender and receiver may cause failure in installation
* Incorrect placement of sender and receiver may cause failure for IR Extender function
* Do not extract the device when in using.
* Keep the device away from inflammable and explosive devices
* Use the DC 5V power adaptor included in the package only
PACKAGE CONTENTS:
1) Main unit Sender x 1
2) Main unit Receiver x 1
3) User Manual
4) IR extender sender
5) IR extender receiver
6) 5V DC Power Adapter x 2
DIAGRAM:
