The tool has a 3/16'' shank diameter and a smaller cutting diameter, allowing better control over the size of the cut than larger tools when creating precise details and contours
Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
Double-end square nose end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool''s ability to remove material
Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills

Technical Details

Product Details

Package Dimensions
Width : 0.5 inch
Height : 0.5 inch
Length : 3.1 inch

Shipping Weight: 0.8 ounce (View shipping rates and policies)

ASIN : B00A0PACAI

Product Description

The Niagara Cutter DL213 TiN-coated high-speed steel long-length double-end square nose end mill has a 3/16” shank diameter, two flutes, and a 35-degree helix for creating deep cuts in a wide range of materials. The tool has a 3/16” shank diameter and a smaller cutting diameter, allowing better control over the size of the cut than larger tools when creating precise details and contours. Long-length end mills have longer cutting edges than standard-length end mills for deep slotting and applications with a high depth of cut. The double-end design has cutting edges at both ends of the shank that can be swapped out when one side begins to show signs of wear, doubling the tool life compared to single-end tools. Two flutes have better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. The 35-degree helix angle provides more support behind the cutting edge than higher angles, and increases cutting action and chip evacuation compared to the standard 30-degree helix. It efficiently cuts difficult-to-machine material, moving it up the spiral and away from the workpiece.
The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.000'' to -0.001''. The round shank accommodates a range of tool holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.