Technical Details

Product Details

Package Dimensions
Width : 5 inch
Height : 5 inch
Length : 40 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B00RY8WLW6

Product Description

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG4040FF High Rejection Brackish Water elements feature a FRP outer wrap and 27 mil feed spacers. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. RejectionMin. RejectionPart NumberAG4040FF2,200 GPD85 ft299.5%99%1206761Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77i¿½F (25i¿½C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%. Operating and Design Parameters Membrane: Thin Film Membrane (TFM)Typical Operating Pressure: 200 psigMaximum Pressure: 600 psigMaximum Temperature: 122i¿½FChlorine Tolerance: 1,000 ppm-hrs, dechlorination recommendedOptimum Rejection pH: 7.0 -7.5Operating pH Range: 4.0 - 11.0Cleaning pH Range: 2.0 - 11.5Maximum Pressure Drop: 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU: Feed SDI: Typical Operating Flux: 10-20 GFD (15-35) L.H-1.M-2